Dissertation > Excellent graduate degree dissertation topics show

Within the connection developed to detect its mechanical properties of zirconia abutment

Author: WangDaShan
Tutor: YangJianJun
School: Qingdao University
Course: Stomatology
Keywords: zirconia abutments injection molding technology microgap adaptability compression strength
CLC: R783.6
Type: Master's thesis
Year: 2011
Downloads: 10
Quote: 0
Read: Download Dissertation

Abstract


Objective:The purpose of this study was to develop a inter-joins zirconia abutment and assess its mechanical properties.Methods:The zirconia abutments were made from nanometer zirconia powder by injection molding technology. (1) zirconia abutments and titanium abutments of the 10 which were separately attached to Osstem GSⅡSystem implants were divided into half by wire cutting machine along the plant axial length, then the microgap at interface were measured by scanning electron microscope. (2) 20 zirconia abutments and 20 titanium abutments were separated into four groups; each group included five zirconia abutments and five titanium abutments. Three groups which were chosen randomly were separately attached to Osstem GSⅡSystem implants. Set them to abutment-implant assembly group. In order to simulate the different loading conditions of anterior teeth and molar teeth, the abutment-implant assembly group were grouped by different stress angle:forced the abutments along the plant axial length to 30°(Group A),90°(vertical, Group B), and 0°(parallel, Group C) angles. Then the fracture resistance of the specimens was separately tested and compared. (Speed=0.5 mm/min). The rest group (Group D) was chosen for single abutment. The fracture resistance of the specimens was tested and compared when forced the abutments along the plant axial length. (Speed=0.5mm/min).Results:The prepared zirconia abutments had good shape and fit the plant smoothly. (1) The internal hexagonal microgap of connected interfacial of the zirconia-plant and titanium-plant respectively were 16.90±0.86μm and 11.76±0.50μm, There was statistical differences between the two groups (P <0.05). The minimum microgap of the Moore’s taper place of zirconia-plant and titanium-plant respectively were 5.45±0.68μm and 4.94±0’.66μm; the maximum microgap was 33.85±2.98μm and 9.63±0.94μm. No statistical difference was observed in minimum microgap of the two groups (P>0.05), while there was statistical differences in maximum microgap of the two groups (P<0.05). (2)The compression strength of zirconia abutments and titanium abutments:When the angle was 30°(Group A), the compression strength of zirconia abutment and titanium abutment respectively were 434.66±36.07N and 1073.12±73.96N, there was statistical differences in the two samples (P<0.05). When the angle was 90°(Group B), the compression strength of zirconia abutment and titanium abutment respectively were 301.46±15.38N and 736.36±120.10N,it also had statistical differences (P<0.05). The angle was 0°(Group C), when the mean fracture load was in 1300～2000N, all of the plants had been "s" shape, while both zirconia abutments and titanium abutments had not happen any form of damages. The compression strength of Group D (zirconia abutment and titanium abutment) was 2882.28±164.37N and 1934.14±89.30N, there was statistical differences in the two samples (P<0.05).Conclusions:The zirconia abutments which were made from nanometer zirconia powder by injection molding technology can fit the plant smooth, both the adaptability of abutment-plant connected interfacial and the compression strength under multi-angle load can meet clinical application requirements.

Related Dissertations

  1. The Research on the Formation and Application of Carbonaceous Mesophase,TQ127.1
  2. Study on Resistance of American Sloughgrass (Beckmannia Syzigachne (Steud.) Fernald) Population in Wheat Field to Fenoxaprop-P-Ethyl,S451.221
  3. Research on the Situation of Alienation and the Relationship among Alienation, Family Cohesion, Family Adaptability and Interpersonal Trust for College Students,B844.2
  4. The Flowing People’s Children Learning Adaptability and with Academic Self-efficacy and Mental Health Relationship,G441
  5. Study on Resistance of American Sloughgrass (Beckmannia Syzigachne (Steud.) Fernald) Population in Wheat Field to Fenoxaprop-P-Ethyl,S451.221
  6. Study on Introduction and Cultivation Techniques of Eustoma Grandiflorum in Tianjin Area,S682.19
  7. On the Design of the Decorative Murals and Adaptability,J218.6
  8. U.S. College Students Ability of Social Adaptation,G642
  9. Impact of Group Counseling about International Interaction on New Junior Students’ Adaptation to School,G444
  10. Research on Manufacturing Execution System of Workshop Business Model and Adaptable Framework Application,TP315
  11. The Study on Attributional Style and Learning Adapta Bility of Migrant Children in Junior High School,B844.2
  12. A Study on Career Adaptability for University Students a Case of Undergraduates in Wuhan,G444
  13. Analysis of Japonica Rice Breeding Lines under Diverse Elevation in Yunnan Province,S511.22
  14. Adolescents’ Life Position、Interpersonal Communication and Its Relationship with the Social Adaptiveness about Multi-ethnic Mixed School,B844.2
  15. On Lin Yutang’s Version of Six Chapters of a Floating Life from the Perspective of Cultural Translation,I046
  16. Analysis of the context of advertising discourse from the Cognitive Pragmatics learn angle,H052
  17. Constitution adaptability theory Exploration and Practice in China 's legal,D921
  18. The Effects of Special Orientation Training on the Attention, Memory and Social Adaptability of the Medium Intellectual Disability,G826
  19. The Research on Vocational Education Evaluation and Vocational Education Reform,G719.2
  20. Sequencing and Analysis the Whole Genome of the Arthrospira Platensis AGB-AP02,Q943.2

CLC: > Medicine, health > Oral Sciences > Oral orthotics > PROSTHETIC
© 2012 www.DissertationTopic.Net  Mobile