Dissertation > Excellent graduate degree dissertation topics show

Study on Green Clamping System Driven by Gear Motor

Author: LiuLiLi
Tutor: ZhongKangMin
School: Suzhou University
Course: Mechanical Engineering
Keywords: Green manufacturing Clamping device Linear motor Amplifying mechanism Friction-lock
CLC: TG75
Type: Master's thesis
Year: 2011
Downloads: 37
Quote: 0
Read: Download Dissertation

Abstract


At present, the vast majority of the mobile fixtures using in the field of machinery manufacturing are the hydraulic or pneumatic transmission fixture. The energy transfer line of the two types of the fixtures will result in greater energy loss because they go through a number of links from the energy input to mechanical output clamping component. In addition, the hydraulic transmission will cause environmental pollution due to the evaporation and leakage of the oil. Therefore, the fluid transmission fixture cannot meet the requirement of development of green manufacturing.This paper focuses on how to use the gear step motor in the clamping fixture, and the concrete results achieved are as follows:(1) Provide the necessary information for choosing the gear step motor; provide the necessary information for self-lock structure.(2) Put forward a series combination of self-locking force agencies combined with gear motor, in order to resolve the technical issues of lacking of output force of the gear motor and maintain a stable force when the gear motor is not moving and break the key issue in the application of the gear motor in the fixture.(3) Analysis force agency more systematically, research and develop more innovative series combined with institutional self-locking system, and give the formula of the different mechanics for reference of the engineering and technology.(4) Design a variety of clamping devices driven by gear step motor and based on self-locking agencies force, and illustrate its working principle and technical characteristics for the application of the technology in the field of machinery.The clamping device driven by the gear motor in this paper is a clamping of green technology, which has the following prominent advantages:(1) There is no environmental pollution.(2) Driven by the power directly can have short energy transfer line, less energy conversion devices, higher energy efficiency and the overall costs can be reduced vastly.(3) The linear motor stops working during the processing, so the clamping device will not consume energy.(4) The clamping device will needn’t a huge reducer; So it has compact structure and low manufacturing costs.

Related Dissertations

  1. Predictive Current Controller Design for Linear Motors,TM359.4
  2. Dual Linear Motors Cross-Coupling Synchronized Control in Gantry-moving Type Milling Machine Tool,TG536
  3. Research and Implementation of Fuzzy PID Control System Based on DSP for Linaer Motor,TM359.4
  4. Machinery Green Elements manufacturing process planning and research standards,TH16
  5. Study of a New Tracklayer Structure for the Electromagnetic Suspending Vechicle,U469.72
  6. Characteristic Analysis and Experimental Research on Linear Motor-Driven Miniature Reciprocating Compressor,TB652
  7. Railway Vehicle Manufacturing green technology research,U270.6
  8. Research on Dynamics Performance of Linear Motor Vehicle,U264
  9. The Integration Application Research of Less-or-non Coolant Machining Method,TG501.5
  10. Research of Application about RTEX Ethernet Bus on Numeric Control System,TG659
  11. Multi-cavity design of the pump and the series piezoelectric linear motors in Experimental Research,TH38
  12. Design Principles of Ultra Thin Linear Motor for Electric Knitting,TM359.4
  13. Optimize Design Study of Numerical Control Linear Motor,TM359.4
  14. Simulation Research of Permenet Magnet Linear Synchronous Motor Drive System,TM359.4
  15. The Research on Permanent Magnetic Linear Motor Actuator for High Voltage Circuit Breaker,TM561
  16. Permanent magnet linear motor servo system time-varying sliding mode control,TM359.4
  17. Sliding Mode Control Study of Permanent Magnet Linear Motor Direct Thrust Control System,TP273.4
  18. The Electronic Shogging Control System for Warp Knitting Machine Based on Linear Motor,TP273
  19. Based on Combination Evaluation Method Evaluation and green welding process planning system,TG44
  20. Becomes convex oval piston CNC lathe,TG519.1
  21. Research on Comprehensive Evaluation System of Steel Enterprise for Green Manufacturing,F205;F224

CLC: > Industrial Technology > Metallurgy and Metal Craft > Cutting tools, abrasives,abrasive tools,fixtures,molds and hand tools > Fixture
© 2012 www.DissertationTopic.Net  Mobile