Dissertation > Excellent graduate degree dissertation topics show

Design of Reconfigurable Pipe Cutting Machine and Development of Control Software

Author: XieZuoZuo
Tutor: YinYueHong
School: Shanghai Jiaotong University
Course: Mechanical and Electronic Engineering
Keywords: reconfigurable machine tools cutting intersection curve design method
CLC: TG48
Type: Master's thesis
Year: 2012
Downloads: 109
Quote: 0
Read: Download Dissertation

Abstract


Reconfigurable Manufacturing System (RMS) which aims to adapt to market demands with the character of multi-specification, pilot run, and rapid iteration is an advanced system. As for pipes in steel structure with multi-geometries intersections, there is reconfigurable pipe cutting system, which is reconfigurable for the reconfigurable pipe cutting machines and the reconfigurable pipe cutting control system. This paper present a design method of reconfigurable pipe cutting machine and build a soft platform for the reconfigurable pipe cutting control system which can satisfy the popular cutting of cylinder pipes, taper pipes and rectangle pipe in practice.Chapter2 presents the design method for the configuration of reconfigurable cutting machine. Based on FBS and AD, an adaptive FBS has been built for RMT design. Integrating Lie subgroup or submanifold and Quotient kinematics, the working motion has been composed into the motion of workpiece and the torch which are both described in Liegroup and all the potential configurations. With Pugh Matrix, optimized configurations are sifted and homologous modules are picked out from module library to achieve the optimal machine tool.Chapter3 studies on the solution methods of cutting tasks. Methods based on both mathematical library and graph programmings are discussed. And the comparison between them is also made to show their advantages and disadvantages respectively.Chapter4 describes the implementation of the reconfigurable pipe cutting control system and the software platform.

Related Dissertations

  1. Resource Collection and Vegetative Propagation Technique Studies on Ilex Species,S184
  2. Key Technologies of Modeling and Simulation in Virtual Surgery,TP391.41
  3. A Study on the Application of Traditional Module Ideology in Landscape Form Design,TU986
  4. The Application of Chinese Paper Cutting in Modern Graphic Design,J524
  5. Risk Assessment and Decision of the Railway Cuttings in Southwest Mountain Area,U213.12
  6. Research on the Method for Service Design Based on QFD and Kano Model,F719
  7. The Dynamic Analysis of New Vibratory Pile Driver Coupling System,TU67
  8. Folk Paper-cutting and Modern Design,J524
  9. Mothods for Utilizing L System Theory to Design Home Textile Simplisim Style,J504
  10. Research of Small Capacitance Measuring System in Laser Cutting Capacitance Z Floating Device,TN249
  11. Study on Propagation Technology of Ornamental Eucalyptus,S792.39
  12. Effects of Simulated Drought Stress with Polyethylene Glycol on the Seed Germination and Cutting of Jute and Kenaf,S563.5
  13. The Research of the Design Method of the Plates Storage Heater,V211.74
  14. The Finite Element Analysis of the Load Capacity of S.R.C Columns,TU312.1
  15. The Study on the Cutter’s Abrasion Rule of PDC Coring Bit,P634.41
  16. The Influence Factors of Vegetation Restoration in Cutting Slope along Tong Huang Expessway,X171.4
  17. Functionalization of Carbon Nanotubes and Their Preliminary Applications as Supporting Materials,TB383.1
  18. The Finite Element Analysis and Study on Design Method of the Prestressed Concrete Circular Silo,TU311
  19. Traditional Patterns and the Relationship between the Restaurant Ⅵ Design,J522
  20. Study on Creation of Horinger Paper-Cutting and Regional Graphic Arts,J217
  21. High purity GCr15 bearing steel microstructure evolution and control process,TG142.11

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Metal cutting and equipment
© 2012 www.DissertationTopic.Net  Mobile