Dissertation > Excellent graduate degree dissertation topics show

Study on Performance of Heat Exchange and Optimized Design of Structure for Exhaust Cooler of Stirling Engine

Author: Zhang
Tutor: YangBo；DongKeYong
School: Shanghai Jiaotong University
Course: Power Engineering
Keywords: exhaust cooler performance of heat transfer numerical simulation structure optimization
CLC: TK172
Type: Master's thesis
Year: 2011
Downloads: 44
Quote: 0
Read: Download Dissertation

Abstract


In order to ensure the normal work of the Stirling engine system, exhaust cooler should be equipped to reduce high temperature of exhaust gas to normal degree. It is considered that the structure of the cooler greatly affects flow state and performance of heat transfer. Based on classical theory and numerical simulation method, the heat transfer performance of the exhaust cooler as well as its structure optimization was studied. The heat transfer model of the exhaust cooler was put forward on the inner structure with helical coil mode. By means of CFD codes, Fluent, numerical simulations of flow flied and heat transfer on the tube and shell side in exhaust cooler under various operating conditions and structure parameters were carried out on the basis of reasonable simplification from complex real situation. Through analysis and comparison of simulation results, the rules of fluid flowing and heat transfer were concluded both on the tube and shell side. Furthermore, the data obtained from simulation was fitted by nonlinear function. Then, an experimental formula used in heat transfer calculation was deduced from fitting results and the optimized structure of the exhaust cooler was put forward. It is believed that the results described in the dissertation should be helpful to future improvement of exhaust cooler design.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. The Research of Land-Use Optimization Approach Based on Non-Point Source Pollution Controlled,X24

CLC: > Industrial Technology > Energy and Power Engineering > Thermal engineering, heat > Industrial thermal equipment > Heat Transfer Equipment
© 2012 www.DissertationTopic.Net  Mobile