Dissertation > Excellent graduate degree dissertation topics show

Modification and Application of Transparent Polypropylene

Author: JiangXinPo
Tutor: ZhengShi
School: East China University of Science and Technology
Course: Material Chemical Engineering
Keywords: polypropylene nucleating agent Transparent modified haze mechanical property
CLC: TQ325.14
Type: Master's thesis
Year: 2011
Downloads: 257
Quote: 0
Read: Download Dissertation

Abstract


The effects of extrusion temperature and speed on the performance of transparent polypropylene were study. Best polypropylene process temperature is:the first section 185℃, the second section 210℃, the third section 210℃, the forth section 220℃, the nose 195℃. Best extruder speed:21 Hz.Various transparent polypropylenes were processed by adding sorbitol nucleating agent NA-S25, NA-S20, Millad3988 and organic phosphate nucleating agent such as NA-21, NA-45. It was found that the transparent polypropylene haze is minimum when the concentration of nucleating agent from 0.3% to 0.4%. Compare to the organic phosphate nucleating agent, sorbitol nucleating agent is more effective. Especially, adding 0.4%NA-S20, the haze of F401 is 28.74%, and the PPR is 25.87%. Nucleating agent can improve the tensile strength and bending strength of polypropylene, but the impact strength is decreased. Organic phosphates are better to improve mechanical properties of polypropylene.It is showed that the nucleation density and the number of polypropylene crystal significantly increase, and crystal size significantly reduced after adding nucleating agent. Nucleating agent also can increase crystallinity and the crystallization temperature increases, and crystallization rate is accelerated.Nucleating agent mix with NA-S20:NA-21 can get polypropylene has low haze and high mechanical properties when the ratio is 3:1. Tinuvin-770 reduces moren than 70% impact of y-irradiation on transparent polypropylene when the concentration is 0.1%.

Related Dissertations

  1. Study on the Synthesis and Properties of Copolyimides Derived from ODPA/Isomeric ODA,TQ323.7
  2. Heat Resistant Research of Biodegradable Polylactic Acid Materials,TQ320.7
  3. The Modification of Polypropylene by Melt Grafting and Blending and Its Fatigue Resistance,TQ325.14
  4. Process Safety Research of Polypropylene Plant,TQ325.14
  5. Study on Sulfonation Surface Treatment of Plasma Alkali Secondary Battery Separator,TM910.5
  6. Properties on Aramid 1313 Fabric and the Compound Silastic Rubber Composite Material with This Fabric,TB332
  7. Experimental Research on Seismic Behavior of Mid-story Joints in Specially-Shaped Column Frame Reinforced by Polypropylene Fiber,TU375.4
  8. Comperative Experiment on the Toxicity of Particulate Matter from Different Cities,R114
  9. Polypropylene initial crystal structure of the pressure -induced flow-forming role in regulating,TQ325.14
  10. Modified polypropylene microcellular foam morphology and Control Research,TQ328
  11. Haze environment image enhancement algorithm and its application,TP391.41
  12. Coal combustion and vehicle emissions on air quality,X831
  13. Research on Transparent Ethylene-propylene Copolymer Used for Injection Molding,TQ325.14
  14. Study of Concentrated Seawater Flue Gas Desulphurization by Membrane Absorption,X701.3
  15. Study on Optical Properties of Haze Aerosol at Shanghai with Micro-Pulse Lidar,X513
  16. Study on Flame Retardancy of PP/Mg-al Layered Double Hy-Droxides Nanocomposites,TB383.1
  17. The Study of Compatibility on Polypropylene/Intumescent Flame Retardant Composites,TQ325.14
  18. The Effect of GM6001 on the Corneal Damage and Restoration after Laser Epithelial Keratomileusis,R779.63
  19. Haze defects reduce the photomask cleaning technology, new technology,TN305.7
  20. Exploitation of Materials of Polypropylene Pipe Joints for Water-saving Irrigation,TQ325.14
  21. Study on Crystallization and Mechanical Properties of PP/PET Blend,TQ325.14

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > Polymer resin and plastic > Polyolefin plastic > Polypropylene
© 2012 www.DissertationTopic.Net  Mobile