Dissertation > Excellent graduate degree dissertation topics show

Research and Application of Intelligent Charging Methods for Independent Photovoltaic System

Author: WangHui
Tutor: MaBoYuan
School: Xi'an University of Electronic Science and Technology
Course: Control Theory and Control Engineering
Keywords: Intelligent Charge Battery MPPT Buck
CLC: TM910.6
Type: Master's thesis
Year: 2011
Downloads: 250
Quote: 5
Read: Download Dissertation

Abstract


This paper focuses on the Photovoltaic charging control system.We pay our emph- ases on the implementation including selecting parameters,topology structure,control strategy,Mppt,maintenance of storage battery,and so on.The basic work principles of solar cells and lead-acid batteries have been researched.Through the simulation, the solar cells output performance has been shown. the main factors in the charging process that Shorten the life of the Lead-acid batteries have been analysed.The plan of three-state charging method is used ,which joints the charge and discharge characteristic of the accumulator together with P-V system’s uniqueness. Quick-charge is carried out by MPPT(maximum power point tracing)which uses the incremental conductance algorithm,In the state of over-charge and float-charge,it uses proportion integral control method to realize constant voltage charge.According to the characteristics of the system, adopting Buck circuit as its main charge circuit,A charge controller is designed basing on the pulse width modulation technology. This system USES MSP430F235 as the main controller,the voltage of the solar and batteries are constantly detected.The Duty cycle of the switch is adjusted through the feedback of charging current or the charging voltage. The quick charge adapting MPPT,the over charge and the flate-charge are respectively achieved. This paper has presented the hardware design procedure of the photovoltaic power controller based on MSP430F235 and accomplished the relevant program and algorism using C language.Experimental results indicates that the charge controller can judge the state of battery effectively.And it also can take the corresponding charging method. The MPPT charge rapidly tracking of external conditions change,and the steady-state concussion is little,so that this charge controller can improve the utilization of solar-energy,and high in accuracy in over-charging and float-charging stages,and prolong the life of battery.

Related Dissertations

  1. Study of Tin Alloy Carbon Composite Used for Lithium Ion Battery,TM912.9
  2. Preparation and Properties of Silicon Carbon Anode for Lithium Ion Battery,TM912.9
  3. Things based lithium battery Intelligent Integrated Management System,TM912
  4. Research on Photoltaic and Its Key Technology,TM615
  5. Investigation on the Modification and Electrochemical Performance of Li4Ti5O12 Anode for Lithium Ion Battery,TM912
  6. The Study of Li-rich Layered Solid-Solution Cathode Materials for Lithium Ion Batteries,TM912
  7. Study on Sulfonation Surface Treatment of Plasma Alkali Secondary Battery Separator,TM910.5
  8. Research on Solar Energy Photovoltaic Grid-connected System,TM615
  9. Research on the Grid-connected Photovoltaic System Based on Cascaded Multilevel Inverter,TM464
  10. Preparation of Silicon-based Alloy Anode Material Andelectrochemical Properties,TM912
  11. Investigation on the Electrode Process of V(Ⅳ)/V(Ⅴ) Species and Modification of Graphite Felt as Electrode in a Vanadium Redox Flow Battery,TM912
  12. Study on Application of Solar Energy Street Lamp Intelligent Controller,TM923.5
  13. The Study of the Power System and the Ground Testing Equipment of the Micro-Satellite,V416.8
  14. Studies on Modeling and Control of Distributed Energy Storage System in Microgrid,TM919
  15. Research on Multi-step Constant-current /Constant-voltage Charging Device Based on DSP Control,TM910.6
  16. Synthesis and Modification of Cathode Materials LiFePO4 and Li2FeSiO4 for Lithium Ion Battery,TM912
  17. Design of Dynamically Self-adaptive Load Current Maximization Technique in PV Cell MPPT Systems,TM914.4
  18. Synthesis and Modification of Nano LiFePO4 as Cathode Materials,TM912
  19. Study on Synthesis and Modified of LiFePO4 as Cathode Materials,TM912
  20. Large Scale Wind Power Integration Technology Based on the Vanadium Redox Battery,TM912
  21. Study on Anode Electrolyte Stability and Battery Performance of Vanadium Redox Flow Battery,TM912

CLC: > Industrial Technology > Electrotechnical > Independent power supply technology (direct power) > General issues > Charging method,charging equipment
© 2012 www.DissertationTopic.Net  Mobile