Dissertation > Excellent graduate degree dissertation topics show

IS018000 - 6B standard UHF RFID tag chip digital baseband circuit design

Author: FuRan
Tutor: WenGuangJun
School: University of Electronic Science and Technology
Course: Communication and Information System
Keywords: Digital baseband processor Radio frequency identification Low power consumption Tag chip
CLC: TP391.44
Type: Master's thesis
Year: 2011
Downloads: 100
Quote: 1
Read: Download Dissertation

Abstract


RFID technology (Radio Frequency Identification, the abbreviations RFID ) began to rise in the 1990s of a non-contact automatic identification technology , which uses radio frequency signals to automatically identify the target object and signal interaction . Radio frequency identification technology to trickle in our daily life , widely used in the field of logistics management, intelligent transportation, access control, electronic article surveillance , as well as scientific and medical industries . As the most potential for development of the field of automatic identification technology trends , the RFID market is creating huge commercial value the study design RFID UHF passive RFID has important theoretical and practical significance , a huge market prospects . The main content of the paper is designed based on the ISO / IEC 18000 - 6B protocol UHF passive RFID chip digital baseband circuit . First, the system discusses the development of RFID history, development prospects and its basic working principle . Second , for ISO/IEC18000-6B agreement , given the system architecture of the digital baseband circuit and the module division and simulation results , and gives some low-power design methodology . Entire digital baseband circuit using Verilog code to achieve its function through the FPGA platform validation , analysis by the Synopsys Design Complie synthesis and timing , power consumption , and finally using TSMC 0.18um CMOS Mixed Signal Process process flow sheet . The test results show that the UHF RFID tag chip operates in the 860MHz to 960MHz , the read range greater than 5m digital baseband circuit design operating current of less than 3uA , logic functions and simulation results are basically the same , completed in line with the agreement in all mandatory command as well as some of the recommendations of command to reach the the completed label inventory operations , read and write operations and a latch and queries latch function , the tag chip well positioned to meet the requirements of the design specifications .

Related Dissertations

  1. Design and Simulation of UHF RFID System Based on the Protocol of EPC C1G2,TP391.44
  2. Animal products quality safety and security regulation of RFID systems,TS201.6
  3. Software Approach to Implement Power Optimization in Embedded Handheld Mobile Gis Device,TP311.52
  4. Research on Low Power Techniques of the Instruction Fetching Unit in Embedded Processors,TP332
  5. Research on the Low-cost RFID Systems Security Protocol,TP391.44
  6. A High-Performance Audio ∑△ ADC in 65nm CMOS Process,TN792
  7. The Research and Design of Radio Frequency Monolithic Voltage Controlled Oscillator in 0.18μm CMOS Technology,TN752
  8. The Research and Design on Wireless HART Adapter,TN915.05
  9. Low-power、multi-host Interface、multi-layer Design of the LCD Controller,TN873.93
  10. The Design and Implementation of Management and Control System of RFID Code Resolution Networks,TN915.0
  11. The Low Power Research of Adaptive Receiver of OFDM Digital Base-band,TN851
  12. Study on Mobility Management for IPv6-based Wireless Sensor Networks,TP212.9
  13. Way-predict Based Low Power Cache Design,TP333
  14. RFID Authentication Protocol Based on Hash Function,TP391.44
  15. Research of the Security Authentication Protocol for RFID Systems,TP391.44
  16. Based on low-power embedded Linux system design and implementation of the program,TP368.1
  17. RFID data cleaning treatment strategies and algorithms,TP391.44
  18. RFID applications for the tobacco industry demonstration platform,TP391.44
  19. RFID complex event processing and real-time query optimization strategy,TP391.44
  20. A Low Power Power Management System for Passive RFID Tag Chip,TN402
  21. The Research and Desigh of Food Safety Supervison Based on the RFID Technology,F203

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Computer applications > Information processing (information processing) > Pattern Recognition and devices > Optical pattern recognition devices
© 2012 www.DissertationTopic.Net  Mobile