Dissertation > Excellent graduate degree dissertation topics show

Study on the Integration Simulation Model of Casing Inside and Outside Gravel-Packing in Horizontal Wells

Author: WuLong
Tutor: DongChangYin
School: China University of Petroleum
Course: Oil and Gas Field Development Project
Keywords: Unconsolidated sandstone Horizontal wells Integration gravel packing Plasticity compress packing Failure mode identification
CLC: TE358.1
Type: Master's thesis
Year: 2011
Downloads: 56
Quote: 0
Read: Download Dissertation

Abstract


For unconsolidated sandstone reservoirs, gravel packing technique in horizontal wells not only has good effects, but also reduces the impairment of the production of oil and gas wells and may even increase the production. Current casing outside gravel packing technology in vertical wells has been widely used, but the technology in horizontal wells of unconsolidated sandstone formation is still in the stage of preliminary exploration. In this paper, based on the study of casing inside gravel packing and the technology of casing outside gravel packing in horizontal wells, integration simulation model is proposed, and casing outside gravel packing is conducted in-depth study.As the rock strength parameters are important factors in casing outside gravel packing, a lot of experiential models for the rock strength parameters based on log data and experience have been researched. The time-varying model of rock strength near well is proposed and established, in which the impact of sand production and the production time on rock strength are considered.According to rock strength and working condition, unconsolidated sandstone failure mode has been divided into two modes: tensional frac and plasticity compress. A formation failure mode identification method is especially established, to judge whether the failure mode of the formation under high pressure extrusion is crushing failure or cracks occurred failure. For the compression crushing damage, according to Mohr-Coulomb criterion and the basic theory of plane strain axial symmetry, a method to calculate compaction zone size in high pressure extrusion is deduced, in which the non-uniform azimuthally stress effect on the compaction zone size is considered, and the model can be used to accurately describe the formation of extrusion failure mode after packing.Finally, through the mechanism of packing integration in horizontal well, integration packing is divided into casing outside gravel packing and casing inside gravel packing. A method started on critical velocity of suspended gravel to calculate the minimum construction displacement in casing outside gravel packing is established. Based on all theories in the paper, an integration packing integrated calculation software is developed, which can be used to calculate casing outside compacting zone size and the compacting zone dynamic simulation in integrated gravel packing. The paper provides the basis and conditions for integration gravel packing field application in the future.

Related Dissertations

  1. Study of Vector Well Pattern for Sandstone Oil Reservoir with Bottom-water,TE324
  2. Drilling Technology Study on Fishbone-type Multi-branch Horizontal Wells in Shenyang Oilfield,TE243
  3. Research on Posture Detection Technology of Parallel-Horizontal Drilling Wells in Steam-Assisted Gravity Drainage Craft,TE243
  4. A Study on Subsurfacesucker Rod Pump Artificial Lift in Horizontal Wells,TE355.5
  5. Percolation Mechanism and the Development Design of Horizontal Wells and Multi-lateral Wells,TE312
  6. Research on the Horizontal Well Excavating Potential of Thick Reservoir,TE327
  7. Horizontal well testing analysis theory and methods,TE353
  8. Research of Reservoir Feature and Development Technology Strategies of Su10 Block in Sulige Gas Field,TE323
  9. The Optimization of Perforated Completion Technology of Horizontal Well,TE257.1
  10. Design Optimization of Horizontal and Vertical Well Patterns in Low Permeability Reservoirs,TE348
  11. Geological Design Research on Horizontal Well in the Southcetral of Raoyang Sag,P618.13
  12. Jingbian gas field horizontal wells reasonable work system,TE328
  13. The Study on Water Drive Development Adjustment Measure of TaZhong 4 Oil Field,TE357.6
  14. The Optimization of Horizontal Well Perforation in Fanshentun Oil-Field,TE357
  15. Research for Drilling Technique of Coring Technology of Long Section in Horizontal Section,TE243
  16. Improve the speed ladder horizontal drilling technology,TE243
  17. Xinhai 27 ordinary secondary development of heavy oil reservoir,TE323
  18. Liaohe Oil Region Du 84 Horizontal Well Use Degree Research,TE345
  19. Appliance of MEG Drilling Fluid System in Da Qing Oil Field,TE254
  20. Algeria / ADRAR upper stratum wellbore stability technology areas,TE21

CLC: > Industrial Technology > Oil and gas industry > Oil and gas development and mining > Production Engineering > Underground operations,workover > Well sand , sand
© 2012 www.DissertationTopic.Net  Mobile