Dissertation > Excellent graduate degree dissertation topics show
Study of Temperature On-Line Monitoring Techniche for High-Voltage Distributin Equipments Based on Optical Fiber Grating
Author: DongLiKe
Tutor: ZuoFengCheng
School: Yanshan University
Course: Proceedings of the
Keywords: High voltage distribution facilities Temperature monitoring Fiber grating Peak-detection algorithm General polynomial fitting
CLC: TM764
Type: Master's thesis
Year: 2011
Downloads: 158
Quote: 0
Read: Download Dissertation
Abstract
|
In modern industry, failure and break down of electrical equipments usually show abnormal temperature. High voltage switch cabinet, electric cable and busbar in power distribution room are all important electrical equipments. In the long time of processing, contacts of electric cable,busbar and junctions between rest contact and movable contact of switch cabinet cause accidents which results in a lot of damage and loss of life and property because of high temperature. But traditional methods of temperature measurement fall behind and the function is so single that can’t meet the need of real-time monitoring of the high voltage electrical equipment’s temperature.The fiber grating sensor is the best choice for temperature monitoring of high voltage distribution equipments.This research includes:Firstly, the basic theory of fiber grating properties is expatiated, spectral characteristics of uniform-period fiber Bragg grating and the sensing principle of FBG under temperature and strain using the coupled-mode theory are analyzed. Steel capillary package method of fiber Bragg grating is studied.Secondly, wavelength demodulation technologies of FBG are introduced. In view of dense and messy lines in the high voltage power distribution room, a wavelength-division multiplexing plus time-division multiplexing demodulation method is designed. The demodulation system, including the photoelectric conversion and amplifier circuit, FIR filter, and FFP-TF scanning voltage generator can monitor the temperature of more than one root of a large number of cable joints. The feasibility of the system is approved by simulation and experiment.On this foundation, this paper detects peaks of the theoretical and experimental reflective spectrums using general polynomial fitting algorithm and Gaussian fitting algorithm. Gaussian fitting algorithm is proved to be the best by simulation and experiment.Experiment on temperature characteristic of FBG is carried on and general polynomial fitting algorithm is applied to the result. And the cubic polynomial fitting algorithm is proved to enhance the precision of the modulation system effectively. At last, temperature measure experiment of 24 hours is carried on.
|
Related Dissertations
- Analysis of Thermal Characteristics and Research on Method of Temperature Protection of Enclosed Busbar,TM645.11
- Oil-immersed transformer three-dimensional temperature field modeling and on-line temperature monitoring system,TM411
- Research on Network Thermodymanic and Online Temperature Estimation System Based on Submersible Motor,TM346
- Research and Development of Portable Temperature Logger and Its Monitoring System,TH811
- Spectral Characteristics and Sensing Characteristics Investigation of the Long-period Fiber Grating,TP212
- The oscillation structure study of magnetron light for all-optical regeneration,TN929.1
- Long period fiber grating device characterization,TN253
- Reconstruction of long period fiber grating coupler,TN622
- Study on Health Monitoring of Prestressed Structure with Smart FRP-OFBG Strand,TU378
- Design and Implementation of Temperature Wireless Monitoring System for Power Station Equipment,TM63
- 980nm filter and new fiber bending written long period fiber grating,TN253
- Preparation and tilted fiber grating sensing property of,TN253
- The Research of Optical Fiber Grating Sensor Measuring Technology,TN253
- Based on Optical Fiber Communication of Remote Temperature Monitoring System,TP274.4
- Development of the Oil Field Heat Washover Process Temperature Monitoring System Based on Fiber-Optic Sensingtechnology,TP29-A2
- Research and Realization on CNC Machine Tools Temperature Monitoring System Based on the Wireless Sensor Technology,TP274
- Birefringence optical fiber grating and magnetic tunability of,TN253
- Study on the Transmission Characteristics of Dielectrically Chiral Fiber Grating,TN253
- The Research of the Online Temperature Monitor for 10kV Switch Assemblies,TM591
- Study of Simulated Experiment on Hydrothermal Change in the Artificially Wall of Earthen Architecture Sites,K854
CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Power system automation > Distant measurement and remote control
© 2012 www.DissertationTopic.Net Mobile
|