Dissertation > Excellent graduate degree dissertation topics show

Synthesis and Application Study of Epoxy Vinyl Ester Resin for Wind Generator Blades

Author: YaoXing
Tutor: ShenBenXian;HouRuiGang
School: East China University of Science and Technology
Course: Chemical Engineering
Keywords: Cool epoxy vinyl resin Fan blades Mechanical properties Solidify Application
CLC: TQ323.5
Type: Master's thesis
Year: 2011
Downloads: 141
Quote: 0
Read: Download Dissertation


With the world becoming increasingly serious energy crisis, wind energy as a clean, natural resources are increasingly subject to national attention. Development of wind power industry has become the consensus of the world. Wind energy is clean, safe, unlimited features, is the largest commercial development conditions and development prospects of the natural energy sources. As the current chosen fan blades are imported epoxy resin, high cost, is not conducive to the use and localization. Based on this, the paper carried out for fan blade epoxy vinyl ester resin synthesis and application of research. First, the paper examines the synthesis of epoxy vinyl ester resin main factors to optimize the epoxy vinyl ester resin polymerization reaction conditions: E-51 and methacrylic acid molar ratio of 1:2.1 materials; catalyst for the three ethylamine, the total amount of the reaction raw materials 0.5% (m); polymerization inhibitor is hydroquinone, the total amount of the reaction raw materials 0.04% (m); the reaction temperature is controlled at 120 ± 5 ℃. In this reaction, the reaction for 4 hours, methacrylic acid conversion rate of about 95%. On the process for an intermediate product characterized by IR, indicating that E-51 and methacrylic acid in the reaction is E-51 epoxy ring-opening esterification with methacrylic acid. Then, the paper uses methyl ethyl ketone peroxide as initiator, naphthenic drilling fluid to promote the synthesis of agent for curing epoxy vinyl ester resin, with added initiator and accelerator increases, the epoxy vinyl ester resin condensate gel time becomes shorter, the exothermic peak becomes large: the promoter and initiator is added at 1-3%, respectively, the gel time can be adjusted within the range 16min to 72min; the longer gel time, the more exothermic peak small. Also investigated the initial curing temperature and heat treatment on post-curing epoxy vinyl ester resin properties, and with imported epoxy resin for wind turbine blades compared to the mechanical properties, in addition to slightly lower elongation at break, put thermal peak height values, the other mechanical properties are met or exceeded imports for fan blade mechanical properties of epoxy resin, and in the process also has a low viscosity, high reactivity, room temperature curing advantages. Finally, the paper also epoxy vinyl ester resin to achieve a 1L, 100L, 1000L progressively larger reactor test results showed that progressively larger epoxy vinyl ester resin product characterization data consistency, consistent product performance, stability enlarge good, easy to industrial scale production. Synthetic epoxy vinyl ester resin produced by wind turbines in Inner Mongolia Chifeng Hedley actual hook wind field experiments, experienced a severe test of the low-temperature (-45 ℃), wind generators everything is normal. Show epoxy vinyl ester resin can be used as fan blades produce resin. Cost-effective.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of (ZrB2-ZrO2)/BN Composites,TB332
  2. Research on Welding Characteristics of CO2 Laser-GMA Hybrid Welding for Ultra-Low Carbon Bainitic Steel,TG456.7
  3. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  4. Research of PROFIBUS-DP Typical Application System,TP273
  5. The Research on the Performance Results Application of Zhaoqing Power Supply Bureau,F272.92
  6. The Practice and Exploration of Compiling Rural Junior Middle School Art Textbooks Base on the Local Resources of Jingmen,G633.955
  7. Development and Preliminary Application of the Questionnaire on Emotional Labour of the Middle School Teacher,B841
  8. A Study on Curriculum Management in Applied Universities,G642.3
  9. Study on Proportions and Applications of Concrete with Iron Mine Tailings,TU528
  10. Signal Acquisition and Processing Platform Design and Implementation of Trawl Sonar System,S951.2
  11. The Application of Geographical Park (Room) in Secondary School’s Geography Teaching (Dissertation for Defence),G633.55
  12. Development and Preliminary Application of Junior High School Studengts’ Counter-School Culture Questionnaire,G631
  13. Traditionalcraft Dyeing’s Research and Application Design,TS193
  14. The Innovation Design and Application Research of Hand Crochet,TS941.2
  15. Study on the Recycling of Post-Consumer Polyester Textiles,X791
  16. The Current Usage and Recommendations of Video Resource in the Excellent-quality-course in University,G642.3
  17. Fabricationand Properties of SiC-AlN Multiphase Ceramics Prepared by Gelcasting,TQ174.62
  18. The Research on the Formation and Application of Carbonaceous Mesophase,TQ127.1
  19. Synthesis of Polysulfones and Modification for Epoxy Adhesives,TQ433.437
  20. Management System Design and Implementation of troop strength,TP311.52
  21. Effect of Nitrogenapplication Patterns on Variation of Soil Nitrate-N and Grain Yield of Wheat and Maize,S512.11

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > Polycondensation resin and plastic > Epoxy resins and plastics
© 2012 www.DissertationTopic.Net  Mobile