Dissertation > Excellent graduate degree dissertation topics show

Calculation on Windings Stability in Condition of Switching No-Load and Short-Circuit for Transformer

Author: YuXiaoHui
Tutor: LiYan
School: Shenyang University of Technology
Course: Motor and electrical
Keywords: Transformer Stability Electromagnetic Force Inrush Current Natural Frequency
CLC: TM401
Type: Master's thesis
Year: 2009
Downloads: 108
Quote: 1
Read: Download Dissertation

Abstract


One of the most important issues in transformer industry and research is the power transformer windings which may be damaged or even collapsed by the powerful electromagnetic force. In recent years, the conclusions drawn from the transformer damage, its process and its subsequent disintegration of inspection showed that incidents are not caused by the material damage, but the windings can not continue to maintain the overall structure of the intact windings (that is, the stability of the windings) because of the electromagnetic force. Shortage in sufficient stability of power transformer windings has become one of the main reasons for the damage of power transformer and outstanding problem for the operation of transformer. Therefore the stability and research of large power transformer has very important practical significance in product development and design process.In this paper, mechanism and characteristics of the inrush current generated by no-load on the single-phase and three-phase transformer is analyzed. A precise numerical simulation of switching no-load inrush current is made under different circumstances of core residual flux and switch-on phase angle for transformer type SZ11-31500/66 under the application of MATLAB. Meanwhile, the inrush current transformer windings electromagnetic force and the stability are calculated through the application of calculation and analysis software-large-scale power transformer winding short-circuit strength calculation and analysis software. In the axial stability calculation, the application of finite element software ANSYS is applied to establish the three-dimensional axial model for natural frequencies transformer windings. During the calculation, non-linear of material and axial pre-stress effects is fully considered as a reference for the choosing of axial pressure on the transformer windings. In the aspects of horizontal stability calculation, a reasonable horizontal electromagnetic force model is created for the inner winding (clamped at both ends of the single-span model) and the criterion of pressure instability inside the windings is given in this paper. Meanwhile, transformer DFP1-240000/500 is taken as an example under the application of finite element software ANSYS clamped on both ends of the elasticity and elastic-plastic model of single-span were calculated and analyzed. And it is pointed out that material plastic deformation factors are to be fully considered in the horizontal stability calculation in the windings.

Related Dissertations

  1. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  2. The Study on Structural Calculation and Analysis Method of Lattice-type Crane with Variable Cross-section Boom,TH21
  3. Power System Dynamic Voltage Stability Simulation Study Based on Precise Integration Method,TM712
  4. Simulation and Analysis about Switched Reluctance Generator Power Supply System,TM31
  5. The Equivalent Circuit Model of Radial Vibration Mode Piezoelectric Transformer and Its Application,TM406
  6. Research and Design for the Laser’s Power Control System of Laser Direct Writing,TN249
  7. Stability Analysis of Systems with Time Delays,TP13
  8. Research on Input-To-State Stability of Discrete-Time Nonlinear Systems,TP13
  9. Astudy on Samuel Huntington’s Theory of Political Stability,D09
  10. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  11. Thermal Stability of Complexes of Chitosan Quaternary Ammonium Salt and Metal Ion,O634
  12. Synthesis and Application of the chloro- methoxy fatty acid methyl esters,TQ414.8
  13. Breeding of High-Yield Pigment Production Monascus and Studies on Pigments’ Qualities,TS202.3
  14. On Ohba’s Conjecture of One Class of Complete Multipartite Graphs,O157.5
  15. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  16. Research on Anti-periodic Solutions of Delayed Cellular Neural Networks without Assuming Global Lipschitz Conditions,TP183
  17. Characterization and Properties of capsaicin / CD system,TQ450.1
  18. Study on the Mechanism of Partial Discharge Emitting Ultrasonic Wave and Propagation Property Within Power Transformers,TM855
  19. Preparation and Properties of lead-free glass powder,TQ171.6
  20. Preparation and Evaluation on the Toxicological Safety and Stability of Deer Blood Wine,TS262.91
  21. Evaluation on Stability of Threshing and Redrying Lamina Structure of Tobacco,TS443

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > General issues > The basic principles of
© 2012 www.DissertationTopic.Net  Mobile