Dissertation > Excellent graduate degree dissertation topics show

Influence Study on the Hydraulic Transients of the Equivalent Diversion Tunnel Length

Author: HaoRongRong
Tutor: YangMin
School: Tianjin University
Course: Water Resources and Hydropower Engineering
Keywords: Diversion tunnel Hydraulic transients Hydraulic characteristics Numerical simulation Model test
CLC: TV135
Type: Master's thesis
Year: 2010
Downloads: 56
Quote: 0
Read: Download Dissertation

Abstract


Hydraulic transients is a common hydraulic phenomenon during the operation of the hydropower station。the waterhammer pressure and the surge waves in the adjuster brought about by the hydraulic transients will challenge the safety of the water diversion systerm, especially the pressure piping system, so the study of hydraulic transient, especially about its influence factors will has very important practical significance,in not just avoiding the unsteady flow accidents but also ensuring the safety and stable operation of hydropower station. In this paper the impact on hydraulic transients by the hydraulic equivalent length of diversion tunnel will be studied take the example of the Shi Touxia hydropower station.Firstly ,based on the theory of pipe flow transients and adopting the method of characteristics, This paper developed the mathematical model for the hydraulic transient process which happened in the normal operation of the hydropower station , and the mathematical model are used to compute the hydraulic transient process in some certain working conditions. And its compute result provides reference basis for the following study about the change of the diversion tunnel length. Then the length of the diversion tunnel will de changed in different proportion with equivalent treatment, the so-called "equivalent" means that some proportional local head losses will be introduced to make sure the total head losses during the diversion tunnel can not be changed.so is the hydraulic equivalent. Then do some adjustment in the program structure according to the above operating . Compute the hydraulic transients process in the same working conditions and compare its result with the initial reference results, get the impact on hydraulic transients by such change of the diversion tunnel length. It is that some hydraulic character parameters of the transient process,mainly refers to the waterhammer pressure and the surge waves in the adjuster,will reduce in varying degrees with the shortening length of the diversion tunnel under the precondition of hydraclic equivalent.According to this topic, in order to verify numerical calculation results above mentioned, we have design the whole physical model of the water system, after the the normal hydraulic transient model test, execute the so-called equivalent change in the diversion tunnel of physical model and do the same hydraulic transient experiment research again under the same working condition. The experimental results show that it agree with the numerical calculation results.Based on the conclusion and combined with the curve reflecting the relationship between the tunnel length variation and the hydraulic parameters variation, give the curve fitting and get the function equation which provide modify reference for equivalent model test results.This method improve the flexibility of the selection because of the shortening of the tunnel length when we design the physical model test , so it has very practical reference value and important research significance.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Hydraulic Engineering > The basic science of water resources project > Hydraulics > Engineering hydraulics ( hydraulic construction hydraulics )
© 2012 www.DissertationTopic.Net  Mobile