Dissertation > Excellent graduate degree dissertation topics show

Research on Material Micro-Nano Indentation Hardness Measurement Simulation

Author: LiuYaLong
Tutor: ZhouLiang
School: Harbin Institute of Technology
Course: Mechanical Manufacturing and Automation
Keywords: indentation experiments hardness measurement finite element method simulation work-of-indentation method
CLC: TB302
Type: Master's thesis
Year: 2010
Downloads: 243
Quote: 2
Read: Download Dissertation

Abstract


Following the development of micro-nano machining technique and the application of micro-parts, the measurement and evaluation technique of micro-parts’surfacial mechanical property have become a key in the machining process. Hardness is a simple and efficient means in the micro-nano dimensional surface property measurement. Macroscopical hardness measurement is limited by the testing system resolution and can not satisfy the microcosmic demands. Therefore, test and evaluation techniques for indentation hardness have significant academic value and actual significance. Under micro-nano dimension, the load-depth curve is affected by the indenter shapes, inhomogeneity of material property and the systematic error, etc., it is unable to appraise and calculate the real hardness value of the material. Adopting the simulation analysis of indentation course can neglect the influence factors that can’t be dispelled in the experiment. And it offers important basis for finding the factor, which influences the hardness calculation and leads to the hardness indentation size effect. So the study for the measurement and evaluation of micro-nano dimension hardness technology has important theory value and realistic meaning.Based on the analysis of the indentation hardness testing process, a finite element method (FEM) simulation of the indentation process is designed and a FEM simulation model established. The model is achieved by setting material property in accordance with the plasticity of pure Al and locating boundary conditions and applying load of indenter on the basis of real indentation experiment. Operating the FEM simulation post-processing and the ABAQUS secondary development to output indentation load-depth curve and indentation surface data, provide basis for the application of hardness calculations.Based on FEM indentation experiments, expand the theoretical study of the different indentation hardness calculated method. Caculating hardness achieved by Oliver-Pharr method and by area and volume of indentation. According to anylasying the different hardness calculation methods under each indentation depth, the FEM simulation indentation experiments calculated hardness results are consistent with the real indentation experiments, so it is proved that the reasonable of FEM indentation. Because of the indentation pile-up, lead to Oliver-Pharr method calculated hardness values are relatively large, the methods of direct area and the volume hardness are more closer to the true hardness of material, the volume hardness method is more stable.Based on FEM indentation experiments, expand the study of factors of radius of indenter tip, friction coefficient between the indenter and the substrate and the verticality of indenter, the results show that the volume hardness value changes gentlest, little influence by the radius of indenter tip, friction coefficient between the indenter and the substrate, the verticality of indenter, elastic recovery, pile-up and sink-in, etc..Expand indenter radius effects on the hardness of the theoretical analysis, the FEM simulation indentation experiments calculated hardness results are consistent with the real indentation experiments, verified by FEM indentation experiments. By reducing the size of model and the grid refinement can improve the accuracy of FEM indentation hardness when the indentation depth is small. By re-setting the boundary conditions of FEM indentation model, hardness calculation errors can be reduced in the large indentation depth.

Related Dissertations

  1. Research on Car Frontal Impact Simulation and Crashworthiness Analysis,U467.14
  2. Study on Frontal Offset Impact Crashworthiness of Car,U467.14
  3. Analysis on Mechanical Property of Anisotropy of Crystal CaF2 and Simulation of Cutting Process in the Ductile Mode,O733
  4. The 3D Finite Element Numerical Simulation and Analysis of the Foundation Pit Considering the Effect of Seepage,TU753
  5. Ships welded joint research Vickers hardness measurement,U671.8
  6. Fused Silica UV laser initial damage morphology,TN249
  7. Electrical impedance tomography,O435.1
  8. The Mechanical Modeling of Indentation Creep Test and Creep Characterization,TB302.3
  9. The Development of Micro and Nano Hardness Measurement System,TP274
  10. The indentation experiments computer simulation and fatigue response of the small grain boundary,O346.2
  11. The Effects of Titanium-ion Implantation on the Physicochemical and Biological Properties of Pure Titanium Implants,R783.1
  12. Study of a New Type Bainitic Steel and It’s Heat Treatment,TG161
  13. Study on Rock Mechanics Parameter Back Analysis and Construction Mechanics Problem in Underground Chamber,TU452
  14. Finite Element Analysis and Experiment Research of Bearing Cages Multi-mould Drawing,TG356.2
  15. Study on the Rule of Multangular Bending Springback,TG386.31
  16. Numerical Analysis of Cold Roll Forming of France DIRICKX AXIS70,TG386
  17. Trajectory Planning for Capillary in IC Wirebonding,TN405.96
  18. Based on the finite element method tipper transit asphalt material temperature field simulation and analysis,U415.5
  19. Optimize of the Roller Load During Continuous Rolling of Multiformity Rolling Mill,TG333.17
  20. Research on Sheet Metal Forming Limit Stress Diagram,TG386
  21. Study on Special Space Truss Steel Structure under Complex Supporting Condition,TU391

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > General issues of engineering materials > Engineering and materials testing
© 2012 www.DissertationTopic.Net  Mobile