Dissertation > Excellent graduate degree dissertation topics show

Design and Realization of High-Energy Industrial Computed Tomography System Multi-Channel Data Transfer and Control Interface

Author: ZhaoWei
Tutor: HanFangJing;HuZhongYu
School: National University of Defense Science and Technology
Course: Electronics and Communication Engineering
Keywords: PCI bus Windows 2000 operating system WDM driver Low Voltage Differential Signaling Data transmission
CLC: TP274.2
Type: Master's thesis
Year: 2007
Downloads: 59
Quote: 0
Read: Download Dissertation


PCI bus due to high performance, low cost, open the advantages of, obtained the rapid popularity and development, has become the high performance microcomputer in fact bus standard; Based on the NT kernel Windows 2000 operating system also because of its high safety and stability as well as good user interface and maneuverability, become the mainstream operating system. Multi-channel data acquisition transmission control card is high energy industrial CT (Computed Tomography) system front-end detector array and back-end data processing of data between computer and control channel, to undertake the various control command, status word and front detector data transmission task. Based on thorough analysis of PCI bus standard, Windows 2000 operating system internal mechanism and WDM device driver model, on the basis of detailed description of the system based on PCI bus multi-channel data acquisition transmission control card and Windows 2000 device driver design idea and implementation method, the design of multi-channel data acquisition transmission control card and driver has been successfully applied in a military enterprise high energy industrial CT system, so as to realize the anticipate function.

Related Dissertations

  1. Research on the Method of Electromagnetic Induction Data Tansmission in Downhole,TE928
  2. Research on High-Performance Computer I/O Bus,TP336
  3. The Development of Soft System for Power Load Management Terminal Testing Device,TP311.52
  4. Research on Data Acquisition and Transmission Technology in High Speed Digital Image Acquisition System,TP274.2
  5. Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X,TP274.2
  6. Research on Real-Time Performance of Computer Numerical Control System Based on Windows,TG659
  7. Application of AWG in Decoy Protection Equipment,TN97
  8. UAV Telemetry System Research,V279
  9. Design and Implementation of Communication System between Double-chips Based on PCI Bus,TN47
  10. Energy Balance Research in Wireless Sensor Network,TN929.5
  11. The Design and Application of PXI/PCI Bus Device Driver,TP336
  12. Interface Driver Design and Realization of Mutiple-dsp Parallel Processing for Route Planning System,TP368.12
  13. Train Communication Network in research and development related interfaces,TN915.852
  14. Block-level continuous data protection for virtual recovery technology,TP309
  15. Highway dedicated communication system and its application research,TN915.85
  16. Data Acquisition System Based on PCI Bus Research and Design,TP274.2
  17. Design of Signal System for Urban Rail Transit Based on Communication-Based Train Control,U284.48
  18. Digital Platform and Data Transmission Software Design for a New VHF Frequency Hopping Radio,TN914.41
  19. Development of Digital GPS Receiver Based on PCI Bus,P228.4
  20. Researches on the Relevant Technique of Network RTK,P228.4
  21. The Research and Application of Fuzzy Neural Networks in Adhesive Production Process,TP183

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Data collection and processing systems
© 2012 www.DissertationTopic.Net  Mobile