Dissertation > Excellent graduate degree dissertation topics show

Optimised Design & Molding Study on Complex Shell Plastic Article

Author: LiZhiPing
Tutor: YanZheng
School: Sichuan University
Course: Materials Processing Engineering
Keywords: Plastic products CAE Optimization Filling flow Analysis
CLC: TQ320.66
Type: Master's thesis
Year: 2005
Downloads: 203
Quote: 4
Read: Download Dissertation

Abstract


Related Dissertations

  1. Research on Developmental Strategies of Commercial Fitness Clubs in Nanning Based on SWOT Analysis,G80-05
  2. Quantitative Analysis of Pyrolysis Component of Typical Low Volatile Coal of Chinese,TQ530.2
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  5. Image Analysis System of Metal Transfer of Gas Metal Arc Welding,TG444
  6. EDM Electrode Wear Mechanism and Control Research,TG661
  7. The Effect of Composite Additive on the SNCR,X701
  8. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  9. Tooth Profile Modeling and Machining Error Analysis of the Face Gear,TH132.41
  10. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  11. Error Analysis and Measurement Method Design for the Hemispherical Resonator Gyro,V241.5
  12. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  13. Temperature Drift Modeling and Compensation of Fiber-Optic Gyroscopes,V241.5
  14. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  15. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  16. Reseach on Optimal Control of Elevator Group Based upon Ant Colony Algorithm,TU857
  17. Transient Thermal Analysis of Multi-Body System with Complicated Boundary Conditions,TK124
  18. Research on Testing and Analyzing Technology for Time Parameter of Aerospace Relay,TM58
  19. Research on High Efficiency Interior Permanent Magnet Synchronous Motor,TM341
  20. The Basic Research of Axial Flux Inductor Type High Temperature Superconducting Motor,TM37
  21. Development of the Femoral Head Replacement Prosthesis,R318.6

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > General issues > Production process and production technology > Forming
© 2012 www.DissertationTopic.Net  Mobile