Dissertation > Excellent graduate degree dissertation topics show

Simulation Modeling of Pulverization System in the Power Station and It’s Dynamic Characteristics

Author: ChenXianChun
Tutor: YangJun
School: Wuhan University
Course: Power Engineering
Keywords: pulverization system coal mill simulation modeling dynamic characteristics.
CLC: TM621
Type: Master's thesis
Year: 2005
Downloads: 338
Quote: 4
Read: Download Dissertation

Abstract


Nowadays, the thermoelectric generating sets above 300MW have become the main power generation units in coal-fired power plants. Units is gradually complicated, automation lever improved continuously, and the problems of the safe and economic operation become much more prominent. It presents higher requirements about the operation and maintenance of the pulverization system.However, the pulverization system itself is an extremely complicated system: it is a close coupling, multivariable and nonlinear time varying system. At the same time there also exist many uncertain interference factors: the two phase flow of gas-solid transfer and flow in the pipelines and equipments; the wet coal is drying and heat-transfer with the gas, etal. Simulating the actual pulverization system, which can make it more easy and accurate for us to study and analyze the dynamic property of the pulverization system.The simulation modeling of the system, which can exactly reflect the characters and process of the pulverization system are very difficult because of the complexity of the pulverization system itself.Presently, the dynamic response of the simulation model about the ball mill is correct and the quantitative error won’t be great~[1] . But it has not been long to use the middle-speed mill and fan mill in thermoelectric generator units in China, and there are still big gaps between the simulation model and the actual behavior.Therefore, the thesis attempts to make modeling and analysis research toward the pulverization system, through which the method and the experience of the simulation modeling are obtained.This thesis is mainly about the simulation application of pulverization system. The contents are mainly about following items:1. Integrated introduction about the pattern of pulverization system in the thermoeletric generating sets is presented for the followed simulation modeling of thesystem.2. Study the foundation theories and practical methods of the fluid network modeling, which are then applied to the modeling of the pressure-flux passage of the pulverization system.3. The mathematic models of the performance parameter and the thermal dynamic calculation of the pulverization system are established.4. The mathematic models of the pulverization system’s auxiliary equipment (coal feeder, coal seprator, etal.).5. Variable dynamic simulation models on lumped-paremeter are set up, and their dynamic properties are analyzed as to improve the models’ accuracy.6. Based on Simpanel, project the simulation programme and make figure configuration modeling. Then carry on simulation debuggings and simulation experimentions; analyze the result and the dynamic characteristic as to verify the modeling effects.The simulation models are proved to be effectice for high precision, and have been applied to the Xinhua Corporation’ simulation system which has already developped many sets of power plant simulators with high appraisement.

Related Dissertations

  1. Research on Multi-Agent-Based Fire Scene Evacuation Simulation at High-Rised Building,TU972.4
  2. Scramjet engine fuel supply system solutions research,V235
  3. Simulation System Modeling and Analysis for Technical Operation of Railway Marshalling Station,U292.16
  4. Study and Implementation of a Wireless Sensor Network Simulator (SnSim),TN929.5
  5. Tobacco distribution centers Modular Modeling and Simulation,F426.8;F224
  6. Study on Current Detection Method and Control Technology of STATCOM Based on Instantaneous Reactive Power Theory,TM761
  7. Wind-induced Vibration Response Analyses of Long-Span Arch Bridge Considring Soil-Structure Interaction,U448.22
  8. Ergonomic mobile phone design for the elderly and digital simulation,TN929.53
  9. Detection and Analysis on Cracks and Property Deterioration of the 16MnR Welded Joints Caused by Copper Infiltrating into the Weld,TG441.7
  10. Analysis of Human-induced Loads of Tibetan Ancient Architecture,TU312.1
  11. Research on Reentry Dynamics and Guidance of Manned Deep Space Exploration,V448.2
  12. Research on the Virtual Prototype and Dynamics Simulation of Bridge Crane,TP391.9
  13. Research on the Dynamic Characteristics for Vehicle-turnout of Passenger Dedicated Line,U213.6
  14. Research on Relative Methods of Damage Inspecting and Safety Appraisal of Bridge Steel Structures in Service,U446.3
  15. Seismic Analysis of a Cable-stayed Bridge with Single Arched and Inclined Tower,U442.55
  16. CNC machine tool spindle dynamics research and testing,TG659
  17. Analysis of the Static and Dynamic Characteristics of ShaWan Extradosed Cable-Stayed Bridge,U448.27
  18. Assessment of Static and Dynamical Behavior for a Steel Tube Concrete Arch Bridge by Spatial Models,U441.3
  19. Parameter Influencing Analysis of Dynamic Characteristics of Cable-Stayed Structures,TU311.3
  20. Nonlinear Dynamic Analysis on the Transmission-cable System,TU347
  21. Analysis of High-rise Building Structure with Large Openings in the Upper Floor and with Enlarged Base at the Bottom,TU973

CLC: > Industrial Technology > Electrotechnical > Power generation, power plants > Power plant > Thermal power plants, thermal power stations
© 2012 www.DissertationTopic.Net  Mobile