Dissertation　

About 39 item dissertation in line with Polyflow query results,the following is 1 to 50(Search took 0.067 seconds)

  1. Study on Rheological Properties of Abrasive Media in Abrasive Flow Machining,SunYanWei/Taiyuan University of Technology,0/29
  2. Numerical Simulation Research on the Single-screw Extrusion Process of Propellant Substitute,YinShuPan/Nanjing University of Technology and Engineering,0/6
  3. Numerical Simulation on the Extrusion Process of Propellant Based on POLYFLOW,WangZuo/Nanjing University of Technology and Engineering,0/17
  4. Analysis of Draw Flow Field and Deformation Control during Extrusion of Polymer Catheter,ChenYuHui/Central South University,0/19
  5. Design and Numerical Simulation Application of Rubber Injection Mold with Cold Runner,ChenLianShuai/Qingdao University of Science and Technology,0/59
  6. Research on New Process of Combination of Local Vacuum Forming and Extrusion Blow Molding,LiDaoXi/Chongqing University of Technology,0/51
  7. Study of New Structure of Plastic Ampoules and Its Molding Method,BiSiQiang/Beijing University of Chemical Technology,0/72
  8. The Process Investigation of Polyproylene Foaming Pleet by Technology of Supercritical Fluid,XieXingYang/Beijing University of Chemical Technology,2/250
  9. The Tandom Extrusion Device and Process Investigation of Polyproylene Foaming by Technology of Supercritical Fluid,CongLin/Beijing University of Chemical Technology,1/251
  10. Research and Development of the Polymer Melt Pump with the Transporting System,ZhangWei/Harbin University of Science and Technology,1/118
  11. Simulation and Analysis of Flow Field in Spiral Mandrel Blown-Film Die,XinYeBo/Beijing University of Chemical Technology,3/80
  12. Study on Influence of Flight Configuration of Injection Screw to Melt Conveying Performance in Metering Zone,SongLiZuo/Beijing University of Chemical Technology,2/105
  13. Study on the Screws Configuration for UPVC Injection Molding,LiuJu/Beijing University of Chemical Technology,0/121
  14. The Research on CAD/CAE Technology of Plastic Profile Extrude Die,ChenLinSheng/Hefei University of Technology,0/243
  15. The Simulation and Analysis of the Flow of Screw Mixier,LiuWeiLiang/Beijing University of Chemical Technology,2/224
  16. Study on Flow Field in Extrusion Die for Plastics Window Profile,BianXiaoMing/Beijing University of Chemical Technology,2/86
  17. Research of Shunting Ring Structure and Output Balance of Rubber Venting Extruder,ZhangYunLong/Beijing University of Chemical Technology,0/75
  18. Mixing Principle of Disc Extruder for Preparing Polymer Based Nanocomposite,SunYuTang/Beijing University of Chemical Technology,1/126
  19. The Structure Analysis and the Computer Simulation of the Pipe Die with Spiral Mandrel,YangHaiLong/Beijing University of Chemical Technology,2/134
  20. Study on Three-Dimensional Flow of Coat-Hanger Die for Sheet Extrusion,XieXiaoHong/Beijing University of Chemical Technology,1/139
  21. Steel Framed HDPE Pipe Forming Technology,SunGan/Harbin University of Science and Technology,1/137
  22. Simulation and Software Development of Forming Process on PET Drinking Bottles,ZhangZhaoCui/Zhejiang University,1/128
  23. Optimization of the Rotors of the Twin-Rotors Continuous Mixer and Studying of Its Mixing Mechanism,ZhangHaiYan/Beijing University of Chemical Technology,1/124
  24. The Numerical Computation of Viscoelastic Fluid in the Micro-pore,LiuLiLi/Daqing Petroleum Institute,3/163
  25. Study on the Clean Production of Caramel Pigment in Tortoise Deer Wine of Yedao,LiZuo/Jiangnan University,0/80
  26. Research on the Impact of Injection Parameters to the Energy Consumption of the Injection Molding Machine,LiFu/Taiyuan University of Technology,0/136
  27. Study on Precison Filtration of Acrylic Spinning Solution,LiuQiang/Donghua University,0/74
  28. Microchannel residual force and deformation of oil droplets Numerical Simulation,LiMeng/Daqing Petroleum Institute,0/88
  29. Effects of Pressure’s Changing in Extrusion Blow Molding on Wall Thickness of Hollow Industrial Workpieces,WangHaiMin/Chongqing University of Technology,2/86
  30. Performance and Mechanism Study of Double Drive Melt Pump,LiXuDong/Beijing University of Chemical Technology,1/36
  31. Study on the Jet Stretching of Electrospinning Polyvinylalcohol(PVA) Nanofibers and Numerical Simulation,JiaLin/Donghua University,2/129
  32. The Design and Theoretical Ansalysis of an New Melt-Distribution Structure in Extrsion Die,ZhangXiaoPing/Beijing University of Chemical Technology,1/67
  33. Experiments and Study of Generalized Viscosity of Polymer Melts,GongDeng/Beijing University of Chemical Technology,0/93
  34. Simulation of Flow Field in Adapter between Twin-Screw Extruder and the Die,QianXue/Beijing University of Chemical Technology,0/45
  35. The Research of the Flow in the Internal Mixer Using Simulation Method,ZuoZuo/Beijing University of Chemical Technology,0/41
  36. The Design and Simulation for Four Plunger Extrusion of UHMWPE,XiongShuYun/Nanchang University,0/39
  37. Gas-assisted Polymer Extrusion Process and Numerical Simulation,LiPing/Harbin University of Science and Technology,0/108
  38. Study of Melt Flow in the Composite Spinning Components and Numerical Simulation of Fiber Forming Process,CaoJunYu/Donghua University,0/232
  39. Numerical Simulation Study on the Process of Electrospinning and Experimental Verification,ZhangJianZong/Donghua University,0/73

Total 1 Pages First Previous 1 Next Last

© 2012 www.DissertationTopic.Net  Mobile