Dissertation　

About 212 item dissertation in line with springback query results,the following is 51 to 100(Search took 0.036 seconds)

  1. Study on Springback of Air-conditioner’s Backboard,GuoMeiLing/Huazhong University of Science and Technology,0/27
  2. Research on the Prediction of the Bending Springback Based on Grey Theory and Neural Network Model,WangZhi/Southwest Jiaotong University,0/39
  3. Numerical Simulation of Multi-point Forming of Sheet Metal with Flexible Blank-holder,ZuoWenJing/Jilin University,0/35
  4. Research on the Forming Limit and Spring-back of Ultra High Strength Steel(Docoll200M) with Warm Bending,WuYuQin/Chongqing University of Technology,0/41
  5. Characters and Control Methods of Torsion Springback in HSS Stamping,WuLei/Hunan University,2/182
  6. The Numerical Simulation and Experimental Research on Bending Springback and Die Surface Compensation,WangXing/Shandong University,0/38
  7. Experimental and Numerical Study on Springback of HSS Sheets V-bending under Variable Forming Speed and Forming Load,XuGang/Huazhong University of Science and Technology,0/50
  8. Research on Springback Evaluation for Automotive Panels and Inverse Determination of Material Parameters,XuZhengXing/Huaqiao University,0/56
  9. Basic Research on Bending Springback and Control of High Strength Steel Polygon Structural Parts,LiShiMing/Chongqing University of Technology,0/57
  10. Numerical Analysis and Compensation Research of Springback in Multipoint Forming for Metal Sheet,HaoJie/Inner Mongolia University of Science and Technology,0/104
  11. Sheet Metal Forming Mould Correction for Springback Based on Nurbs,ChenRongChuang/Wuhan University of Technology,0/58
  12. Complex Curved Surface with the Springback Control Compendation Research in Hollow Blade,WangFaCheng/Jiangnan University,0/67
  13. Research on Sheetmetal Forming Analysis and Springback Control for H08Longitudinal Beam,HuNaiBing/Hunan University,0/70
  14. Numerical Simulation of Stamping Forming Process for the Left and Right Shield Panel of Bora Automobile,WuFeiXiang/Jilin University,0/63
  15. The Applicaiton of Springback Simulation on the Manufacture of Automobile Panel,CuiKeQin/Jilin University,0/67
  16. The Analysis of the Microbus Body-Side Sheet Drawing Forming Simulation,ChenZuoTao/Southwest Jiaotong University,0/88
  17. Research on the Control Techniques of Convex Cracking and Warping Springback Caused by Local Features Forming during the Large Sheet Parts Stamping Process,MaoLiChen/Hunan University,0/84
  18. Research on High Strength Steel Roll Forming Process,FanZuo/North China University of,1/61
  19. Study on Multi-objective Optimization of Forming Process of Front Rail and Die Techology,LuoZhiMin/Hunan University,0/102
  20. Stamping Forming Process and Simulation Study for Sedan Atypical U-shaped Stamping Parts,GaoWei/Jilin University,0/83
  21. Study on the Springback of High Strength Steel Sheet after Bending and Its Control,JiZuoZuo/Chongqing University,0/107
  22. The Research about the Influence Law of Shape Defect of Strip on Sheet Metal’s Springback of Stamping,LinCe/Yanshan University,0/97
  23. Study on Stamping Technology of Excavator Cab Side Panel and Mold Design,ShengDaYin/Shandong University,0/119
  24. Parameters Optimization of Sheet Metal Drawing Process and Robust Design of Distortional Springback,WuZhaoQi/Shanghai Jiaotong University,0/125
  25. Forming Numerical Simulation and Springback Analysis of Automotive Structural Part Using High-strength Steel,ZhengShengHu/Jilin University,0/138
  26. Dynamic Fe Analysis on High-strength Steel Variable Section Roll Forming with Protrusion and Hole,PengWenFang/North China University of,2/74
  27. Research on the Numerical Simulation of Sheet-metal Bending Springback Based DYNAFORM,LiuJiaJie/Central South University of Forestry Science and Technology,0/256
  28. Research on the Formability of AZ31B Magnesium Alloy Sheet,LiWenJuan/Shandong University,0/572
  29. Numerical Simulation and Experimental Research for Stretch Bending Springback Regularity of Profiles,YangJiYun/Yanshan University,1/80
  30. Research on Formability of Tailor Rolled Blank,ZhangHuaWei/Dalian University of Technology,0/116
  31. Design and Research of the Four Rollers Plate Bending Machine CNC System,LiSen/Nanjing University of Aeronautics and Astronautics,0/45
  32. Springback Research on Aerofoil Blade in Hot Die Forging,ChenEnZhi/University of Electronic Science and Technology,0/62
  33. Research of Flange Defects in Flexible Roll-forming,WangShiPeng/North China University of,0/18
  34. Numerical Simulation on Spirngback’s Control of the Flexible Spinning,ZhangWenRu/Jilin University,0/124
  35. Numerical Simulation and Experimental Research on Micro Bending Process of Pure Copper Foil,JiangHua/Shandong University,0/20
  36. Numerical Simulation of Multi-Point Forming for Curved Hull Plate,GuSiHui/Jilin University,0/50
  37. Research on Stretch Bending Forming Process for Large Curvature Profile by Numerical Simulation,ZhangZuo/Jilin University,0/61
  38. Symmetrical three roller bending machine bending analysis of mechanism and the forming process parameter,QiaoBo/Taiyuan University of Science and Technology,0/62
  39. Research and Development of Special Bending Machine for Large Diameter Profile,GuoChang/Dalian University of Technology,0/62
  40. Effect on 2124 aluminum alloy rebound, microstructure and properties of creep age forming,ZhaoJianHua/Central South University,0/146
  41. Research on the Influence of Process Parameters on Forming and Performing of2524AA Components in Creep Ageing Forming,TanSiGe/Central South University,0/112
  42. A Study of Eletroplastic Stress Relaxtion and Eletroplastic Bending Properties of DP980High Strength Steel,ZhouXue/Shanghai Jiaotong University,0/77
  43. Numerical Simulation and Experimental Research on Multi-Point Sandwich Forming of Steel Sheet,ZhangZuo/Harbin Institute of Technology,5/277
  44. Key Techniques Study of Automobile Panel’s Springback,NieZuo/Hunan University,7/416
  45. Theoretical and Numerical Study on Springback Prediction in Sheet Metal Forming,ZhangDongJuan/Shanghai Jiaotong University,16/1320
  46. The Research on Springback of Auto-body Panel Based on RE,GongZhiHui/Hunan University,6/648
  47. Several Pivotal Multi-point Forming Process and Its Numerical Simulation Study,QianZhiZuo/Jilin University,8/423
  48. Study on the Compensation of the Springback and the Control Measurement for Automobile Panel,LiChunGuang/Jilin University,14/978
  49. The Research on Inverse Problems in Sheet Metal Forming Processes Based on Neural Network,HanLiFen/Hunan University,8/339
  50. Numerical Simulation of Process Mode and Deformation Defects on Multi-Point Forming,SunGang/Jilin University,8/381

Total 5 Pages First Previous 1 2 3 4 5 Next Last

© 2012 www.DissertationTopic.Net  Mobile