Dissertation 

About 212 item dissertation in line with springback query results,the following is 1 to 50(Search took 0.035 seconds)

  1. Study on Form Planning of Archwire and its Bending Robot,JiangJiXiong/Harbin University of Science and Technology,0/26
  2. Research on Forming Technique in Half Wave Resonance Superconducting Cavity,ZhiHui/Harbin Institute of Technology,0/11
  3. Study of the Strain Distribution and Springback for Ship Hull Curved Plate in Cold Forming,YangYanQin/Huazhong University of Science and Technology,0/6
  4. Algorithm Research and System Development of High Strength Steel Springback Geometry Compensation Based on CATIA,SunShiYan/Huazhong University of Science and Technology,0/13
  5. The Bauschinger Effect in Auto-body Forming and Its Influence on Springback,ZhuangJingBiao/Hunan University,0/31
  6. Study of Manufacturing Process for Leading Edge of Helicopter Composite Blade,WangZuoQin/Nanjing University of Aeronautics and Astronautics,0/5
  7. An Ansys-based FSW Component for Age Forming Simulation and Springback Research,ZuoDuQuan(ZuoXiaoJun)/Nanchang University of Aeronautics and,0/35
  8. Research and Design of Key Mechanical Structure of the3D Numerical Control Bending Wire Machine,LuChao/Xi'an University of Architecture and Technology,0/19
  9. Molding Process Simulation Analysis of Thin-walled Parts and Optimization of Process Parameters,GengQiuDi/Northeastern University,0/9
  10. Research on the Formingaccuracy Control and Springback Compensation Method of Tailor Welded Blank Car B Pillar,HuoXueHuan/Harbin University of Science and Technology,0/7
  11. Study on Forming Simulation and Springback Compensation of the Front-carling Inner Plate,WuShanDong/Chongqing University,0/92
  12. Study on Theory Analysis and Experiment in Stretch Bending for Typical Profile,MaXiaoAn/Yanshan University,0/90
  13. The Development of Wave Spring Coil Forming Device and Key Technology,LiShiQiong/Yanshan University,0/27
  14. Bending Springback Crub Technical Research Based on Compensation Iteration,ZhangSong/Yanshan University,0/28
  15. Influence of Surface Parameters on Sail Surface Springback Under Force-displacement Separated Control,ZhouMan/Harbin Institute of Technology,0/18
  16. Research on Key Technologies of Large Complicated Multi-position Progressive Stamping,WangZuo/South China University of Technology,0/38
  17. The Theory of Springback Analysis for Profile Plane Stretch-bending and Verification,DiRuiXue/Yanshan University,0/8
  18. A Numerical Study of Springback Deformation Properties of Die-less Spinning and Its Multi Roller Path Planning Method,LiYong/Zhejiang University,0/14
  19. Numerical Simulation and Experimental Study of Springbacks on the Multi-point Forming of Sail Surfaces under Force-displacement Separated Control,ChenZe/Harbin Institute of Technology,0/9
  20. The Process Study on Creep Forming for7475Aluminum Alloy Integral Stiffened Ribs Panel,WuYang/Central South University,0/16
  21. Study on Effect of Forming Stages and Interval Angle on Multi-stage Incremental Forming,GengPei/Chongqing University,0/40
  22. Finite Element Analysis and Springback Prediction of the Press Bending of L-section Steel Part,ShiYang/Dalian Jiaotong University,0/6
  23. The Research on Deformation and Finite Element Analysis of Large Bending Radius Tube in Process of Push Bending,DuZuoFei/Jiangsu University of Science and Technology,0/6
  24. Reverse the spiral thin-walled tube hydroforming simulation and optimization,KongChengHai/Jiangsu University of Science and Technology,0/1
  25. Research process and springback control frame type steel roll forming,ZhangBao/Nanjing University of Technology and Engineering,0/4
  26. Hot Stamping Forming and Springback Prediction of Ultra High Strength Steel BR1500HS,LiShiYun/Chongqing University,0/64
  27. Finite Element Analysis of Creep Age Forming for Aluminum Alloy2124,TangLuHua/Central South University,0/26
  28. The Variation Principle of Straight Beam in the Model Plastic Deformation and Rebound Problems Research,LiuGuanXiong/Yanshan University,0/10
  29. The Detecting System Based on Numerical Simulation for Surface Distortion of Automobile Panel,ShiZhiHui/Huazhong University of Science and Technology,0/35
  30. Study on the Influence Factors and Control Method for Surface Lowof Exterior Auto-panels,NiXiaoFeng/Shanghai Jiaotong University,0/49
  31. Study on quality control of stamping forming simulation optimization and key technology of automobile panel stamping,ZhangJing/Yangzhou University,0/77
  32. Robust Design of the Springback of TRB S-RAIL Beam,ZhouHongXi/Dalian University of Technology,0/53
  33. The Study on the Rubber Forming and Springback of the Airfoil Leading Edge Skin,GongLinDong/,1/55
  34. Research on Deformation Mechanism of Springback Induced by Cutting Thin Part Optimization of Fixture,LiuYuMei/Shandong University,0/209
  35. Experimental Study of Electromagnetic Forming in Springback of Aluminum Alloy Curevd Surface,CaiHeng/Wuhan University of Technology,0/102
  36. A New Sheet Metal Forming Technology of Solid Granule Medium Bending Process,LiZuo/,0/18
  37. Experimental Research on the Springback Characteristic of High Strength Steel Sheet Metal Forming Processes,XiaoHua/Shanghai Jiaotong University,0/94
  38. Research of Sheet Metal Forming Based on Defence Node Algorithm,HongHaiJin/Hunan University,0/12
  39. Research and Numeircal Simulation on Stretch Forming with Flexible Rollers for Curved Parts,ZhuBiZhang/Jilin University,0/53
  40. Springback Analysis and Drawing Process Research of B-pillar Inner Based on High-strongth Steel,ZhangZhao/Hebei University of Science and Technology,1/35
  41. Springback Analytic and Process Parameters Optimization of Plate Edge Preflex for the Forming of Large Diameter Longitudinal Seam Welded Pipe,YangQiang/Yanshan University,0/67
  42. The Study of Sheet Forming Based on Reverse Engineering and Numerical Simulation,WangGuangKai/Guangdong University of Technology,0/70
  43. Research on Stamping and Springback Compensation of the Frongt Floor Passage of the Car Using High Strength Steel,TianChuanChen/Yanshan University,0/75
  44. Research on Quality Control Key Technical of Sheet Metal Incremental Forming,WeiHongYu/Nanjing University of Aeronautics and Astronautics,0/124
  45. Study on Springback Prediction and Anisotropy Parameters Inverse Base on Deep-drawing Split-ring Test,CuiFuGang/Hunan University,0/30
  46. U-shaped Part Springback Forecasting Based on the Finite Element Method and the Neural Network,YangXiaoJun/Inner Mongolia University of Technology,0/54
  47. Study of 5182 aluminum alloy V bending springback,ZhouWei/Central South University,0/125
  48. Research on the Prediction and Compensation of Springback and the Forming Performance in the Automobiles’ Central Passageway,LiuPengHui/Harbin University of Science and Technology,0/15
  49. A Constitutive Model of Large Strain and Its Application to Twist Springback Simulation,ZuoYongZhi/Hunan University,0/52
  50. Research on the Springback of Anticlastic Double-curved Part Forming,ZhouXuHui/South China University of Technology,0/10

Total 5 Pages First Previous 1 2 3 4 5 Next Last

© 2012 www.DissertationTopic.Net  Mobile