Dissertation　

About 1311 item dissertation in line with TG38,Cold stamping ( sheet metal processing) query results,the following is 1 to 50(Search took 0.06 seconds)

  1. Research on Hydromechanical Deep Drawing of Cup with Stepped Geometires Based on Numerical Simulation,LiuWeiYan/Harbin University of Science and Technology,0/1
  2. Research and Design of Non-uniform Blank Holder Hydraulic Mold System,YinJun/Northeastern University,0/2
  3. Molding Process Simulation Analysis of Thin-walled Parts and Optimization of Process Parameters,GengQiuDi/Northeastern University,0/9
  4. Research on Forming Process of Sheet Warm Deep Drawing with Counter Pressure,JiangWanBiao/Harbin Institute of Technology,0/43
  5. Study of Micro Deep Drawing Process of Foil Conical Parts,ZhangHua/Harbin Institute of Technology,0/22
  6. Failure Analysis of Nickel Coated Metal Sheet during Deep Drawing,WuJie/Xiangtan University,2/0
  7. The Optimization of Drawing Parameters Based on Response Surface Method,WenYi/Huazhong University of Science and Technology,0/10
  8. Study and Development of Continuous Uufold System of Progressive Die Based on NX,YuHong/Huazhong University of Science and Technology,0/8
  9. Study on Influence of Forming Speed on Stamping Performance of B340/590DP,LiuZuo/Huazhong University of Science and Technology,0/17
  10. Research and Development on Control System of Multi-position Punching Busbar Machine,HuaiJianMing/Kunming University of Science and Technology,0/14
  11. Research the Secondary Bulging of AZ31Magnesium Alloy Sheet,LvZongKai/Harbin University of Science and Technology,0/6
  12. Research on the Formability of Automotive Aluminum Alloy Sheet,ZhangYuan/Hefei University of Technology,0/281
  13. Study of Influence of Punch Speed on Sheet Metal Forming Based on Servo Press,YuJianJun/Hefei University of Technology,0/62
  14. Research on the Drawing Process and Spring Back Control of the B-pillar Reinforced Panel,ZhuQuCai/Hefei University of Technology,0/75
  15. Research on VBHF Technology of Aluminium Alloy Stamping,ZhaoHongMei/Hefei University of Technology,0/43
  16. Research in the Forming Quality Control of Aluminium Alloy Hood's Outer Panel,LiuTing/West China University,0/74
  17. Application of Technology of Multi-objective Optimization in Siulation of Sheet Metal Forming,YangYan/Hunan University,0/13
  18. Life Prediction and Failure Analysis of the Punching Die for Small Holes on Thick Plate Based on Numerical Simulation,ChenXiaoHang/Chongqing University of Technology,0/53
  19. B-pillar Stamping Die Design and Implementation Based on Dynaform,ZhangXianWen/Guangxi University of Science and Technology,0/38
  20. Optimization of Sheet Metal Forming Process Parameter Based on Support Vector Machine Regression Algorithm,FengXiaoLong/Hunan University,0/28
  21. A Study on Wear at the Entrance of the Draw-die of Sheet Metal Stamping and Optimization,WangJinZuo/Hunan University,0/18
  22. Development on Punch-CNC System Based on General Motion Controller,FuGang/Jinan University,0/11
  23. Study on Galling Position for Non-flange Square Cup Drawing with High Strength Steel,FengYan/Xiangtan University,0/17
  24. Theoretical and Experimental Study of Deep Drawing Limit of Magnesia-alumina Composite Plate,NieHuiHui/Taiyuan University of Technology,0/91
  25. Progressive Stamping Process Design and Optimization of an Air-conditioning Value Bracket Based on Numerical Analysis,LiChong/Chongqing University,0/43
  26. High-speed Punching Machine Drive System Life Cycle Reliability Key Technology Research,ZhangHuiJie/Chongqing University,0/46
  27. Study on Forming Simulation and Springback Compensation of the Front-carling Inner Plate,WuShanDong/Chongqing University,0/92
  28. Research on Simulation for Forming the Large Diamater Lsaw Pipes with Four-point Bending JCO Process,WangLiJuan/Yanshan University,0/26
  29. Study on Theory Analysis and Experiment in Stretch Bending for Typical Profile,MaXiaoAn/Yanshan University,0/90
  30. Technology and Finite Element Simulation of Granules or Powder Flexible Cavity Deep Drawing for Cup Shell,FanCunJie/Yanshan University,0/29
  31. Finite Element Analysis and Experimental Research on Deep Drawing Process for Cylindrical Cup and Conical Cup Based on Radial Segment Blank Holder,LiangShaoWei/Yanshan University,0/41
  32. Opening Research on O-forming Process of Large Diameter UOE Pipe,LiHui/Yanshan University,0/26
  33. The Development of Wave Spring Coil Forming Device and Key Technology,LiShiQiong/Yanshan University,0/27
  34. Finite Element Simulation and Experimental Research on Deep Drawing Process for Rectangular Box Based on Radial Segment Blank Holder,ZhangShuDong/Yanshan University,0/29
  35. Bending Springback Crub Technical Research Based on Compensation Iteration,ZhangSong/Yanshan University,0/28
  36. Study on Rigidity Influence Law of Over-bending Setting Round for Pipe End of Large Welded Pipe,ShangJingHua/Yanshan University,0/16
  37. Finiment Element Analysis of the Spiral Welded Pipe Forming Process,TangCaiMing/Yanshan University,0/74
  38. AP1000Nuclear Power Main Pipe Bending Technology Research,LiuLei/Yanshan University,0/50
  39. Research on the New Technology for Forming the Lage Diamater Lsaw Pipes with Four-point Benting JCO Process,NiChuanDong/Yanshan University,0/45
  40. Study on Fine Simulation and Optimization Techniques for Auto Panel Forming Processes,YiGuoFeng/Huazhong University of Science and Technology,0/291
  41. Research of Variable Blank Holder Force Optimization Design Based on Approximate Model,WangRiChao/Hunan University,0/19
  42. Algorithm for the Material Utilization Ratio of the Automobile Panel Based on Stamping Effect,YangJiTao/Hunan University,0/12
  43. Simulation Analysis and Blank Shape Optimization of Deep Drawing Earing for Compressor Shell,WuShiPeng/Hunan University,0/12
  44. Study on Forming Quality for Outer Flanging Process Based on Numerical Simulation,HuangXinHua/Nanchang University of Aeronautics and,0/19
  45. Study on Mechanism and Main Laws of Shear Stress Wrinkling,HanFangYuan/Harbin Institute of Technology,0/40
  46. Influence of Surface Parameters on Sail Surface Springback Under Force-displacement Separated Control,ZhouMan/Harbin Institute of Technology,0/18
  47. The Technology of Drawing Die Digital Repairing Based on DYNAFORM Software,CaoJunHua/Nanchang University,0/125
  48. Simulation and Process Parameters Optimization Study for Curved Flanging,XiaoXia/Nanchang University,0/16
  49. Preliminary Study on the Drawing of Triangle Cup,SunXueJiao/Nanchang University,0/12
  50. Investigation on Hydro-drawing of2A12Alluminum Alloy Box-shaped Part,LiShiHai/Harbin Institute of Technology,0/69

Total 27 Pages First Previous 1 2 3 4 5 6 7 8 9 10 Next Last

© 2012 www.DissertationTopic.Net  Mobile