Dissertation > Excellent graduate degree dissertation topics show

Research on Numerical Simulation of Tracking Polymer Injection Adjustment in Gao Ⅱ 1-18 Reservoir of La 8-182 Well Group

Author: XuChengYu
Tutor: YinDaiYin
School: Daqing Petroleum Institute
Course: Oil and Gas Field Development Project
Keywords: History matching Numerical Simulation Relative molecular mass Concentration Polymer
CLC: TE39
Type: Master's thesis
Year: 2010
Downloads: 20
Quote: 0
Read: Download Dissertation

Abstract


Well area , La 8-182 G Ⅱ 1 ~ 183 reservoir flooded large thickness , high degree of flooding , and different areas of the flooded situation is quite different . Reservoir layers , and flat contradictions exist between layers , and the impact of factors well network deployment and injection-production system is imperfect , resulting in La 8-182 well area G II 1 183 reservoirs spread to the extent of the injected water varied there is still a considerable proportion of the remaining oil exists . La 8-182 Wells District G Ⅱ 1 ~ 183 reservoir characteristics , a detailed understanding of the geological conditions of the block , the application Petrel geological modeling software , phased plus rock - controlled two-step modeling idea to establish La 8-182 3D geological model of the well area , FloGrid pre - processing module processing required to generate Eclipse software model , the application of the Eclipse software to carry out a numerical simulation study . A fine history matching based on mainly analyze the reasons for the formation of the distribution characteristics of remaining oil and remaining oil . For polymer injection well area , La 8-182 polymer injection initial specifications for the concentration of 1200mg / L , molecular weight of 9.5 million , lower values ​​of recovery efficiency , the main causes of the remaining oil . Different injection concentration , molecular weight, the injection speed , the development period layers recovery degree and ultimate recovery . Relative molecular mass of the main analysis , adjust the timing , injection concentration utilized for different types of reservoir conditions . Combination of different molecular weight and different injection concentration and injection pressure relationship , the problems in the development process of polymer injection , put forward a corresponding adjustment programs , including the concentration adjustment molecular weight adjustment stratified injection volume adjustment , development indicators forecast small layer analysis adjusted disposable status, given reasonable adjustment programs .

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Study on Dust Concertiation Measurement Technique Based on Optical Back-Scattering,X831
  6. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  7. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  8. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  9. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  10. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  13. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  14. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  15. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  16. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  17. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  18. Methane Concentration Detecting Instrument Based on Infrared Absorption Theory,TP216
  19. Capsaicin / β - cyclodextrin system to dissolve and penetrate the,R943
  20. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  21. Effects of Light, Temperature and Nitrogen on the Growth of Three Kinds of Aquatic Plants,Q945

CLC: > Industrial Technology > Oil and gas industry > Oil and gas development and mining > Oil field of Applied Chemistry
© 2012 www.DissertationTopic.Net  Mobile