Dissertation > Excellent graduate degree dissertation topics show

Experimental Study of Permeability Enhancements Mechanism Under High Pressure Water Jet Cutting in Low-Permeability Coal Bed

Author: JiangYong
Tutor: LiangBing
School: Liaoning Technical University
Course: Fluid Mechanics
Keywords: Low-permeability coal bed High pressure water jet Cutting Load Relief Permeability enhancements mechanism
CLC: TD712
Type: Master's thesis
Year: 2011
Downloads: 120
Quote: 0
Read: Download Dissertation

Abstract


Coal is the main energy in our country to promote economic development. Gas is the major potential threat during coal mine production, but meanwhile is the high-quality and efficient clean energy. In our country, most of the coal bed is low-permeability. Especially in recent years, because of the deepening exploitation of the coal bed, gas contents and pressure is increasing with the increased Ground Stress, thus the prominent risk gets larger which needs the good gas control technology urgently. The gas drainage technology is one of the important ways to improve the low-permeability single coal bed gas drainage effect.This paper starts from the research of structure characteristic of low-permeability coal bed; with low-permeability coal bed pore fracture structure as objects, based on the aspects of in-situ stress, gas pressure and the pore structure, analyzes the influence on permeability coal bed. Aiming at characteristics of low-permeability coal bed gas, this paper dissertates the gas storage migration mechanism from the aspects of desorption, desorption, diffusion, seepage respectively.Based on the similarity theory, using the similar material model to simulate low-permeability coal bed, by high pressure water jet cutting, using pressure box embedded way to monitor stress variation in model at different sites before and after cutting, combining the displacement of the displacement meters and model permeability change, data analysis of the model stress, displacement, permeability variation rule before and after cutting, to provide experiment basis for enhancements mechanism of low-permeability coal bed.By analyzing experimental research, this paper gets the conclusion that based on the structure of coal bed cutting load relief under the status of confined, the coal on the both sides of slot will be deformation. The stress will be the complex status after stress redistribution. The upper coal displace downward due to slot pressure relief, the break zone produced around slot, coal bed gas appears the nonlinear seepage characteristics of partition area. From the aspect of cutting coal bed structure, dynamic mechanism and gas nonlinear seepage to reveal cutting permeability enhancements mechanism.

Related Dissertations

  1. Ceramic Theramal Sterss Cleaving Technology Based on Laser,TQ174.62
  2. Study on the Broaching Performance of Nickel-base Superalloy Based on Finite Element Method,TG132.32
  3. Analysis of Gray Cast Iron Cutting Factors and Reasonable Choice of Tools,TG506
  4. Research on Vibration Characteristics of Heavy Roadheader Cutting Unit,TD421.5
  5. The Simulation and Numerical Analysis about Manufacture Processing of Stainless Steel Based on ABAQUS,TG501
  6. Toolpath Planning of Ball-End Mill and Off-Line Optimization of Cutting Parameters in NC Milling Process,TG547
  7. Modeling, Simulation and Control Strategy of the Doubly-fed Wind-power Generator System,TM614
  8. The Art of Carving Up. the China Performance,J292.4
  9. Wang Xinshi Seal Cutting Art Achievement,J292.4
  10. Research on Machining Deflection Prediction and Influence of the Cutting Parameters in Peripheral Milling Thin-walled Component,TG54
  11. Research on Trousers of the Old Lady Wheelchair User in Shanghai Area,TS941.1
  12. Study on Fabrication of Polymer Optical Waveguide Based on Moulding Technology,TN252
  13. Research on Path Optimization Algorithm for Laser Cutting,TN249
  14. Mine Cutting Based on Three-dimension Grid Data and Reserves Dynamic Calculate,TP391.41
  15. Research on Outlier Detection Algorithm Based on Ant Colony Algorithm,TP311.13
  16. Research on Intelligent Cutting Database and Data Mining Technology,TP311.13
  17. Embedded Linux Transplantation Based on ARM,TP316.81
  18. Design and Development of Pipe Cutting Offline Programming System Based on VC,TP242
  19. Cutting Parameters Optimization Based on Improved Genetic Algorithm,TP18
  20. Path Planning for H-beam Cutting System Based on Multi-robot,TP242
  21. The Tailoring Tradition of British Fashion,J53

CLC: > Industrial Technology > Mining Engineering > Mine safety and labor protection > Mine atmosphere > Mine Gas
© 2012 www.DissertationTopic.Net  Mobile