Dissertation > Excellent graduate degree dissertation topics show

Study on the Preparation and Properties of Composite Ceramic Coating on AZ31B Alloy by Thermal Spraying

Author: ZouJiFeng
Tutor: MaZhuang
School: Liaoning Technical University
Course: Materials Processing Engineering
Keywords: magnesium alloy SHS reaction spraying thermo-chemical reaction spraying ceramic performance
CLC: TG174.44
Type: Master's thesis
Year: 2011
Downloads: 56
Quote: 0
Read: Download Dissertation

Abstract


Spraying composite powder was prepared by mechanical grinding method and agglomeration method.Using common spraying method,SHS reaction spraying method and thermal chemical reaction spraying method, common spraying ceramic coating,SHS reaction spraying ceramic coating and thermo-chemical reaction spraying ceramic coating were produced on magnesium alloy AZ31B.XRD and SEM were used to analyze the composition and morphology of the composite powder and composite ceramic coating. The thermal shock, compactness, microhardness, wear properties and corrosion resistance of the composite ceramic coating were investigated.The melting rate of SHS reaction spraying ceramic coating and thermo-chemical reaction spraying ceramic coating was high and the combination of the coating and matrix was well. Mg element took place diffusion in the interface of composite coating.TiB2,MgAl2O4 and so on were found in the SHS reaction spraying ceramic coating.Thermo-chemical reaction was carried out in the process of preparing coatings. Al3.21Si0.47, MgAl2O4, Mg3.5Al9Si1.5O20 and so on were found in the coating.The thermal-shock times of these two kind of ceramic coating was 47 and 37, the porosity was 0% after hole sealing with varnish, the maxima microhardness value reached 1224 HV0.1 and 1016HV0.1.Wear properties and corrosion resistance of these two kind of ceramic coating was far higher than magnesium alloy substrate. The thermal shock, compactness, microhardness,wear properties and corrosion resistance of these two kind of ceramic coating was significantly better than common spraying coating.Compare with mechanical grinding method and agglomeration method,thermite reaction had happened in composite powder after 12 hours ball milling and globular structure coated each other was formed after granulation with agglomeration method.The spraying composite powder reacted fully in spraying process and high quality ceramic coating was formed by agglomeration method. The more new phase was produced in ceramic coating and the thermal shock, compactness, wear properties and corrosion resistance was significantly better than the ceramic coating with mechanical grinding method.

Related Dissertations

  1. Empirical Study on the Top Management Turnover and Performance of Listed Companies in China,F224
  2. Recovery Whey Soy Protein by Microfiltration and Development of Whey Powder,TQ936.2
  3. Preparation and Tribological Properties of TZ3Y20A-SrSO4 Ceramic Matrix Composites,TB332
  4. Preparation of Micro-Arc Oxidation Ceramic Coating on Mg Alloy and the Research of Galvanic Corrosion,TG174.453
  5. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  6. Powered Activited Carbon-UF for Treating Micro-polluted Surface Water,X703
  7. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  8. Numerical Study of the Effect with Straight and Bowed Stator in Different Axial Gaps,TH45
  9. Effectiveness Evaluation on the Jointed Combat of the Multiple Missiles and Research on Combinatorial Optimization Algorithm,TJ760.1
  10. The Research of Steel’s Representation in Architecture,TU-0
  11. Partical Combination of Fine Powder Effect on Performance of Cement and Concrete,TU528.041
  12. Fly Ash study of low temperature ceramic foam,TU52
  13. Application of Semi-Structure in Leisure Dress,TS941.2
  14. Modification and Application of the Waste Fluorgypsum and the Treating of High Concentrations Fluoride Wastewater,X703
  15. Technology Study on Bricks of City Waterworks Sludge,X703
  16. Research on the Impact of Debt Financing Structure Upon Corporate Performance on Listed Pharmaceutical Company,F275
  17. The Dynamic Performance Analysis of Oil Pumping Center and Structural Optimization of Improvement,TE933.1
  18. Study on the Third Oil Production Plant of Changqing Oilfield Company Medium-level Performance Management System,F272.92
  19. Synthesis and Application of Monomethyl Maleate Polycarboxylate Superplasticizer,TU528.042.2
  20. Evaluation of between the Occlusal Force and the Tissues Health Surrounding Implant of ITI Implants with Zirconia All-ceramic Crown,R783
  21. Length and number of words when writing English writing on the students performance and accuracy of communication,G633.41

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metal corrosion protection,metal surface treatment > Corrosion control and protection > Metal surface protection technology > Metal complex layer of protection
© 2012 www.DissertationTopic.Net  Mobile