Dissertation > Excellent graduate degree dissertation topics show
Dynamic Simulation of Ammonia Decomposition System for PEMFCs
Author: LiuYan
Tutor: ZhouXingGui
School: East China University of Science and Technology
Course: Chemical Engineering
Keywords: ammonia decomposition simulation system process dynamic PEMFCs
CLC: TM911.4
Type: Master's thesis
Year: 2012
Downloads: 47
Quote: 0
Read: Download Dissertation
Abstract
|
In recent years, green house effect has great impact on our environment. To save energy and increase the efficiency is an inevitable trend. In this thesis, ammonia is used as the raw material to gain H2. This process contains zero carbon. Hydrogen is used to produce power in PEMFCs for small cars. The main models in this process include ammonia decomposition, hydrogen burning, heat exchanger, separation, adsorption and PEMFCs. First, equations of each model are established. According to the equations and real conditions, the best operation parameters are confirmed. Then four kinds of different system processes are established according to the order of each model and the way heat exchangers connected with. The heat usage ratio and energy efficiency in the whole process are reviewed. Combining with the efficiency ratio and economic value, the best system process is confirmed and energy loss in this process is analyzed. After finishing the steady simulation, dynamic simulation in the best process is also calculated. In order to simulate the condition of the start time of cars and the speed-up and speed-down operation, inlet ammonia mole flow rate is changed in the first 300 seconds. The purpose of dynamic simulation is to review the steady performance at the start time and the sensitivity in changing load. The results show that the whole system is steady after 180s, and the steady system has a quick response in changing load.
|
Related Dissertations
- High Dynamic Carrier Tracking Algorithm of Software GNSS Receiver,P228.4
- The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
- Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
- Study on Springback of High-Strength Steel Stamping,TG386
- Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
- Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
- The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
- Research on Control of Precision Centrifuge Dynamic Balance System,TH113.25
- Development of Turbine Rotor Dynamic Balance System,TH877
- Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
- High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
- The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
- Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
- The Research on Artisitify Technology of Santiago·Calatrava’s Architectural Works,TU-86
- Study on the Improvement Depth of Dynamic Consolidation by Methods of Mathematical Physics,TU472.31
- Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
- Numerical Simulation of Biomass Direct Reburning,TK16
- Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
- Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
- Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
- Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
CLC: > Industrial Technology > Electrotechnical > Independent power supply technology (direct power) > Chemical power sources,batteries, fuel cells > Fuel cell
© 2012 www.DissertationTopic.Net Mobile
|