Dissertation > Excellent graduate degree dissertation topics show

Experimental Research on Concretion Characteristics of High Temperature Syngas in Integrated Gasification Combined Cycle System

Author: JiaoGuangLiang
Tutor: QinYuZuo;QiuPengHua
School: Harbin Institute of Technology
Course: Thermal Power Engineering
Keywords: IGCC Alkali metal Concretion characteristics Syngas Temperature
CLC: TM611.3
Type: Master's thesis
Year: 2008
Downloads: 45
Quote: 0
Read: Download Dissertation

Abstract


Integrated gasification combined cycle is one of the trends of clean coal power generation technology. However, alkali vapors easily deposit on heat exchanger surfaces and will lead to slagging. Furthermore, it will also cause high-temperature corrosion of gas turbine blades. Although tolerance limit of alkali vapors in the flue gas is usually given under 0.024 ppm by weight at the inlet of gas turbines, it is actually one or more orders of magnitude than that of the limit. Research on the concretion characteristics of alkali metal, will play an important role in the development of integrated gasification combined cycle.In this paper, an experimental facility was built to study the concretion characteristics of high temperature syngas in the integrated gasification combined cycle. A separable tubular exchanger was designed and built at the outlet of the simulating syngas producing stove to collect the concreted alkali metal, where the simulating syngas is the mixture of CO, CO2, N2 and H2O. By adjusting the contents of the main syngas components, the effects of syngas and alkali metal components on the concretion process were obtained. The concreted components and the concreting state were further analyzed using XRD and SEM. The concretion mechanism on the alkali metal was discussed finally.By analysis, the following conclusions were discovered: the concreted temperature of alkali metal is between 620-655℃in the reducing atmosphere; the steam has no effect on this concreted temperature; the lower the concentration of CO in the syngas, the higher the concreted temperature; if the concentration of CO and the proportion of Na+ and K+ keep invariable, the concreted temperature when both Cl- and SO42- exist is lower than the case when only Cl- exists; the temperature will become higher if the proportion of Na+ become higher when the alkali metal contains both Cl- and SO42- in the same concentration of CO; the result of SEM analysis shows the coagulation surface is complicated, which contains both crystal and non-crystal; the result of XRD analysis shows most of the crystal is NaCl in the coagulation; 600℃maybe the suitable temperature for the syngas come into the convective syngas cooler.

Related Dissertations

  1. Preparation and Electrocaloric Effect of BaxSr1-xTiO3 Ferroelectric Thin Films,TB383.2
  2. Measurement of the Surface Impedance of the High Temperature Superconducting Thin Films with Coplanar Transmission Line,O484.5
  3. Study on Contact Fatigue Life Based on Grease Variation with Temperature,TH117.22
  4. Research on Temperature Measurement Technique Based on CCD Image Sensor,TH811
  5. Development of Explosion Flame Temperature Measurement System Based on Multi-Spectral Thermometry,TH811
  6. Temperature Drift Modeling and Compensation of Fiber-Optic Gyroscopes,V241.5
  7. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  8. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  9. Research on Nozzle Plume Temperature Distribution Measurement System,V434
  10. Numerical Analysis of Flow Process in a Molten Carbonate Fuel Cell,TM911.4
  11. The Basic Research of Axial Flux Inductor Type High Temperature Superconducting Motor,TM37
  12. Research on Temprature Controling Technology of Laser Diode with Thermoelectric Cooler,TN248.4
  13. Research on Millimeter Wave Imaging with Scanning Array,TP391.41
  14. The Development of Electric Control System for Product Line of Cross-Linked Cable,TP273.5
  15. Research on Temperature Control System for Laser Diode,TP273
  16. Design and Study of Temperature Chamber Control System in Servo Table,TP273
  17. Study on Synthesis Intermediate of Vinyl Acetate Ethylidene Diacetate from DME and Syngas,TQ225.12
  18. Research on Temperature Control System for High-Performance Oven-Control Crystal Oscillator (OCXO),TN752
  19. Fly Ash study of low temperature ceramic foam,TU52
  20. Photosynthetic Apparatus Response to Heat Stress and the Mechanisms in Two Different Cotton with Various Leaf Colours,Q945.11

CLC: > Industrial Technology > Electrotechnical > Power generation, power plants > Variety of power generation > Thermal power,thermal power generation > Combined cycle power generation
© 2012 www.DissertationTopic.Net  Mobile