Dissertation > Excellent graduate degree dissertation topics show

The Development of Electric Control System for Product Line of Cross-Linked Cable

Author: LiuZhiCheng
Tutor: ZhaoYongPing
School: Harbin Institute of Technology
Course: Instrument Science and Technology
Keywords: XLPE PLC Temperature control Motor speed control EMC
CLC: TP273.5
Type: Master's thesis
Year: 2008
Downloads: 62
Quote: 0
Read: Download Dissertation

Abstract


XLPE cable is the popularized electric power cable in our country at preset. XLPE cables production lines all use multi-unit and multi-step production technology in our country, moreover, most of them must be imported, therefor research the XLPE cables production lines is of important significance. This dissertation designs an automatic control system which uses PLC as the main controller and includes the Industrial Personal Computer, DC Drive, Frequency-converter, Electronic Balance, Solenoid-controlled Valve and Relay.This dissertation consists of temperature control and rotational speed control of extruder, electronic balance control, safety alarm of system and EMC of system.There are 25 temperature control points in this system. 21 of them should be controlled, and the other 4 points are temperature measurement points. PID algorithm is used to control the high-accuracy points, and as to the other lower accuracy points, hysteresis comparing algorithm is used.Rotational speed control includes DC motor control and asynchronous machine control. DC drive and frequency-converter are controlled by PLC through PROFIBUS-DP. The rotational speed of DC motor and asynchronous machine is controlled by DC drive and frequency-converter.IPC controls the electronic balance through serial port and the running states of the electronic balance are transmitted to the IPC through serial port.To make sure the system works safely, audible alarm and color scintillation alarm are set, and if the alarm happens, the corresponding system failures can be handled.To make sure the system works stably, the dissertation researches EMC of the system. This mainly includes earth connection, geographical and wiring.Running states of all equipments are sent to the IPC to be monitored by the operator expediently, and the system allows the operator to set and modify some necessary parameter and deal with the special actions of the system.This dissertation analyses and designs all the parts of the electronic control system in detail, carries out corresponding debugging in the scene, and builds the good foundation for normal and stability work of the production line.

Related Dissertations

  1. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  2. Study on RFID Techniques in the Manufacture of Used in Automobile Ignition Coils,TP391.44
  3. Research on Temperature Control System for Laser Diode,TP273
  4. Research on Temperature Control System for High-Performance Oven-Control Crystal Oscillator (OCXO),TN752
  5. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  6. Research of Acoustic Signal Acquisition System Based on DSP,TP274.2
  7. Equipment Research of the Ship Sewage Treatment,X703
  8. The Roles of Phospholipase C and D in Xylanase-Induced Defense Responses in Suspension-Cultured Rice Cells,S511
  9. Studies on the Techniques of Multi-season Cultivation for Nanling Mushroom,S646.11
  10. Multilayer coextrusion drooling forming process temperature control technology,TQ320.721
  11. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  12. Gantry planer simulation equipment design,TG551.2
  13. The Design of Monitoring System and Experimental Study of the Solar Assisted Heat Pump Unit with Cooling, Heating and Gaining Hot Water,TK511.2
  14. The Design of Automatic Control System of Experimental Stereo Garage,U491.71
  15. The Design and Implementation of the Automation Management System of Yongchangjing River,TP315
  16. Simulation Research on Hydraulic System of Extra-High Pressure Water Jet Equipment,TH137
  17. The Multi-Application and Implementation of Auxiliary Control Network in Power Plant Desulfurization Systems,TP311.52
  18. Electromagnetic Compatibility Design of Synthesis Communications Vehicle,TN03
  19. Application of the Wireless LAN in the Industrial Control,TP273
  20. Design of Digital Walkie-talkie Base Band Module Circuit and It’s EMC,TN929.54

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system > Computer control, computer control system
© 2012 www.DissertationTopic.Net  Mobile