Dissertation > Excellent graduate degree dissertation topics show

Study on RFID Techniques in the Manufacture of Used in Automobile Ignition Coils

Author: LuoQing
Tutor: ZhaoYongPing
School: Harbin Institute of Technology
Course: Instrument Science and Technology
Keywords: Ignition coil RFID EMC Charge pump
CLC: TP391.44
Type: Master's thesis
Year: 2008
Downloads: 180
Quote: 1
Read: Download Dissertation

Abstract


As the modernization of automobile manafacture speeding up,modernization of automobile pattern product line becomes more important. As a vital part of an ignition system, an ignition coil directly affects the dynamic and environmental protecting performance. The maturity of RFID technics makes it possible to realize automatic monitoring and controlling of automobile ignition coil product line, which will improve the producing mode, lift the effect and save cost. Meanwhile, the adoption of RFID into 4S shops to trace back the cause of vihecle failures can dramatically save the cost of after-sale service, thus enhance the competition ability in the industry, and set up good images to the consumers.This dissertation has finished adopting the RFID technics into the manufacture process control of ignition coils, including the developing of MF RC500 reader, and the realization of the dynamic automobile ignition coil data management by embedding MIFARE tags into the ignition coils. The characteristic of the design is: a single ignition coil test can be finished within 4 seconds; the reading and writing of the test results and relating data can be carried on; real-time parameters recording is realized to trace the condition of the product in order to fulfill the manufacture techniques; superior electromagnetic compatibility of the system is also realized to make it work stably in industrial environment.In addition to basic functions, this dissertation has put great effert on the design of RFID tags, antennas, rectifying and load modulation, charge-pump power supply circuit and data encoding and demodulation included. Based on MCS-2051 MCU and ISO14443A protocol, the system can meet requirements in the experiments.This dissertation has accomplished a series of tests, including the impact of tag data reading and writing caused by the metal in ignition coils, the management of ignition coil data, and the performance of passive RFID tag. The functioning of the system shows that, with its steady work, the system can carry out real-time reading and writing of the automobile ignition coil parameters, which has met the expected need of leave-the-factory product encoding and dynamic data managing.

Related Dissertations

  1. The Development of Electric Control System for Product Line of Cross-Linked Cable,TP273.5
  2. Research of Acoustic Signal Acquisition System Based on DSP,TP274.2
  3. Animal products quality safety and security regulation of RFID systems,TS201.6
  4. Development of Intelligent Interpretation System Based on ARM9,TP391.44
  5. F enterprises with RFID data capture products to improve i Research and Application,TP274.2
  6. Based on RFID Prison Intelligent Management System Research and Implementation,TP315
  7. Study on Framework of Standard System about Logistics Warehouse Based on RFID,F252
  8. Electromagnetic Compatibility Design of Synthesis Communications Vehicle,TN03
  9. Design of Digital Walkie-talkie Base Band Module Circuit and It’s EMC,TN929.54
  10. The Investigation and Application of RFID Technology Based on Split Ring Resonator,TP391.44
  11. The Research of Single Patchand Compact Dual-Band Microstrip RFID Antenna,TN822
  12. The Reader Equipment of RFID Middleware Mangement Research,TP391.44
  13. Design and Realization of a RFID System’s Base-band Part Based on ARM920t,TP391.44
  14. Research on Man-machine System of Construction Material Safety Management with RFID,X937
  15. The High Voltage Generation System Design in Nano-Crystal Memory,TN47
  16. Design and Implementation of Bonding-head for RFID Tag-Package Equipment,TN405
  17. Research and Application of Bilateral Driven Synchronized Motion Control Based on PMAC Motion Control Card,TN05
  18. Design and Realization of Distributed RFID Access Control System,TP273.5
  19. Design of Aircraft Maintenance Tool Management System Based on RFID,TP311.52
  20. Real-time Query Processing and Optimization for Basic Events from RFID Data Streams,TP311.13

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Computer applications > Information processing (information processing) > Pattern Recognition and devices > Optical pattern recognition devices
© 2012 www.DissertationTopic.Net  Mobile