Dissertation > Excellent graduate degree dissertation topics show

Design and Realization of Controllable Measuring Force Profilometer

Author: PanWen
Tutor: ChangSuPingï¼›XieTieBang
School: Huazhong University of Science and Technology
Course: Measuring Technology and Instruments
Keywords: profile measurement controllable measuring force voice coil motor PCI bus motion control card nonlinear error compensation
CLC: TP212
Type: Master's thesis
Year: 2011
Downloads: 33
Quote: 0
Read: Download Dissertation

Abstract


With the rapid development of manufacture technologies, the synthetic measurement of profile with tiny measurement force, large range and high precision has become more and more imminent. Owing to the discrepancy between measurement force and measurement speed, it is of great significance to develop a profile measurement sensor with controllable measurement force.In this paper the force of traditional profiler is analyzed, the complex relationship between measurement force and lever system is derived, a solution which is improved the structure of the lever is proposed. The mechanical relations between the measuring rod and the surface are simplified by the structural change of measuring rod and a gravity center adjustment device. A voice coil motor (VCM) is added into the measuring system to control the measuring force. By adjusting the current in the coil of the VCM in real time, the measuring force can be controlled. Designed A simple method of parameter determination and the method for determining the zero position sensor is designed.The requirements of peripheral circuits is analyzed and the basis of the laboratory is considered, the motion control card is developed by the chip PCI9052. The development process of the motion control card, the motion control card hardware, E2PROM board configuration and debugging process are introduced. Development process and development considerations of using of Windriver to write driver of the motion control card are detailed introduced.The importance of measurement error compensation is discussed, measurement error model is established, the polynomial fitting method is chosen to compensate the measurement error. A method of calculating the polynomial coefficient which use a standard ball is described.The voice coil motor control parameters and the nonlinear errorcompensation parameters are got by experiments, the feasibility of adjusting the measurement force by adjusting the coil current and the effect of non-linear error compensation are validated by experiments.

Related Dissertations

  1. Application of AWG in Decoy Protection Equipment,TN97
  2. Research on the Key Control Technology of CNC Leather Cutter,TS53
  3. Design and Implementation of Cone-beam CT Control Card Based on PCI Bus,R318.6
  4. The Experimental Research on Reliable Service Life of Toothed Gearing,TH132.41
  5. Dual-channel data acquisition module hardware design 3GSPS,TP274.2
  6. Design of Testing Apparatus for Responses Speed of Flowmeter,TH814
  7. Design and Implementation of Communication System between Double-chips Based on PCI Bus,TN47
  8. The Design and Application of PXI/PCI Bus Device Driver,TP336
  9. Interface Driver Design and Realization of Mutiple-dsp Parallel Processing for Route Planning System,TP368.12
  10. Research on the Lying Lower Limbs Exoskeleton Rehabilitation Robot,TP242
  11. Dynamic Simulation and Testing of Multi-axis Control System,TP273
  12. Research on Control Algorithm for Laser Scanner Driven by Voice Coil Motor,TN249
  13. Train Communication Network in research and development related interfaces,TN915.852
  14. Data Acquisition System Based on PCI Bus Research and Design,TP274.2
  15. General Motion Control Method of the All-purpose Conroller of Nonstandard Numerical Equipments,TP273
  16. Development Research on Open CNC System for Twin-turret Vertical Lathe,TG519.1
  17. The Research of Open Style Numerical Control System Based on Windows OS,TG659
  18. Research on NC Path-Planning of Multi-Spindle Drilling Machine and Auto-Programming System,TG527
  19. Research on Auto-detected Device Design of Surface Profile Error Measurement for Railway Door,U270.7
  20. The Design and Realization of Motion Control Board Based on VME Bus and Its Driver,TP273
  21. Based on Researching of Computer-controlled Automatic Welding Machine of Aluminum Bus,TG409

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Transmitter ( converter),the sensor
© 2012 www.DissertationTopic.Net  Mobile