Dissertation > Excellent graduate degree dissertation topics show

Acrylate monomer of ferrous chloride catalyzed atom transfer radical polymerization

Author: WuTuPing
Tutor: YaoHongWei
School: Qingdao University
Course: Materials Science
Keywords: ATRP n-Butyl methacrylate PMDETA Iron~ⅡChloride N-substituted maleimide Polyurethane photocuring
CLC: O631.3
Type: Master's thesis
Year: 2009
Downloads: 106
Quote: 0
Read: Download Dissertation

Abstract


This Paper is divided into two Parts.The first part is focused on the study of Atom Transfer Radical Polymerization（ATRP） of n-butyl methacrylate mediated by FeCl2 catalyst.A new initiator N-butyl-2-bromopropanamide（BBPA） has been designed and synthesized in this article; the kinetics of atom transfer radical polymerization（ATRP） of n-butyl methacrylate （n-BMA） is studied in this paper.Polymerizations of n-BMA have been carried out under the conditions using FeCl2·4H2O/PMDETA catalyst with BBPA used as the initiator in the bulk.Living radical polymerizations of n-BMA have been achieved.The GPC results show that the molecular weights of the polymers are closed to the designed values and the molecular weight distribution（PDI） was narrow throughout the polymerization,such as Wn=17178,PDI=1.16;Wn=45584,PDI=1.18.Plots of ln（[M]0/[M]t） vs.time and molecular weight evolution vs.monomer conversion showed a linear dependence.The dependence of the rate of polymerization and PDI on temperature are presented.At the same time,the PBMA-b-PMMA and PBMA-b-PSt diblock copolymers obtained by ATRP polymerization with PBMA macroinitiators（PBMA,Mn=50913, PDI=1.13;PBMA-b-PMMA,Mn=70616,PDI=1.04;PBMA-b-PSt,Mn=69708, PDI=1.05）.Monomer addition experiments indicated the achieved polymers are "living" polymers.Atom Transfer Radical Polymerization（ATRP） of n-butyl methacrylate is studied in different solvents（toluene and o-xylene）,initiators and monomers.It shows that this system is suitable for methaerylate.The second part is focused on the study of Synthesis of Siliconized Polyurethane Prepolymer and UV-curing.Three N-substituted maleimides（MI） and siliconized polyurethane prepolymer were synthesized and their structures were determined by FT-IR. N-substituted maleimides（MI） were used as photoinitiator to initiate the photocuring of prepolymer,The effects of MI’s concentration and structure on photocuring were studied. The results showed that the resins were photosensitive and the properties of the coating were excellent.

Related Dissertations

  1. Synthesis and Characterization of High-performance Polyacrylonitrile,O631.3
  2. Synthesis and Biocompatibility of different types of hydrophilic surface - modified polyurethane,R318.08
  3. Hydrophilic structure of different types of surface -modified polyurethane material and coagulation 12 factor nine peptide fragments,and fibrinogen P1 fragment of computer simulation of the interaction,O631.3
  4. Prototype Development of Intimate Apparel Mannequin,TS941.2
  5. Preparation and Application of Water-based Polyurethane to Improve Wet Rubbing Fastness,TS193.2
  6. Modification of SEBS Rubber Via Living Radical Polymerization,TQ330.6
  7. Synthesis and Responsive Behavior of Amphiphilic Azobenzene Functionalized Block Copolymers,O631.3
  8. Preparation of Functional Miktoarm Star-block Copolymers Via Combination of Lfrp and "Click Chemistry" Techniques,O631.3
  9. Biocompatibility Modification of Solid Materials Via Living Free Radical Polymerization,O631.3
  10. Organic/Inorganic Hybird Nanoparticles Modified Via Surface-Initiated Living Radical Polymerization,TB383.1
  11. Synthesis and Properties of Functional Waterborne Polyurethane Coatings,TQ633
  12. UV-curable waterborne polyurethane acrylate oligomers,TQ630.1
  13. Synthesis and Properties of Hyperbranched Polymer Based Waterborne Polyurethane Emulsion,TQ323.8
  14. Study on the Synthesis and Properties of Organic Silicone Modified Waterborne Polyurethane,TQ323.8
  15. The Study on Controllable Preparation and Performance of Polyurethane Nano-fiber/net,TB383.1
  16. Evaluation of Biocompatibility of Titanium Alloy Coating by Polyurethane,R318.08
  17. Thermosetting epoxy microsphere preparation, characterization and surface functionalization of,O631.3
  18. Solvothermal system ATRP of MMA,TQ316.3
  19. Refrigerator HFC-365mfc/HFC-245fa/CP triplex mixture foamed polyurethane rigid foam Preparation and Properties,TQ328.3
  20. Peptide derivatives based on the new three synthetic polyurethane chain extender,TQ323.8
  21. The use of rapeseed oil produced bio-based polyol in polyurethane foam technology and applications,TQ328.3

CLC: > Mathematical sciences and chemical > Chemistry > Polymer chemistry ( polymer ) > Polymer physics and physical chemistry of polymers > The chemical nature of polymers
© 2012 www.DissertationTopic.Net  Mobile