Dissertation > Excellent graduate degree dissertation topics show

EDM Electrode Wear Mechanism and Control Research

Author: LuGuiQin
Tutor: HuangJuHua
School: Nanchang University
Course: Mechanical and Electronic Engineering
Keywords: EDM(Electrical discharge machining) Electrode wear and compensation Point Heat Source Model Finite element analysis
CLC: TG661
Type: Master's thesis
Year: 2009
Downloads: 99
Quote: 0
Read: Download Dissertation

Abstract


In pace with the fast development of modern manufacture industry, great advances have been made in traditional cutting technology, which brings heavy pressure to EDM. Because of its unique processing technology and processing methods so that in some specific areas of EDM irreplaceable advantages .The Major research content and innovation results of this essay are following:1、In this paper, the starting mechanism of electric discharge machining in order to EDM machining as a research object, the force suffered on the electrode surface for analysis. Studied through experiments in a particular processing environment, the various parameters on the impact of electrode wear;2、Of EDM pulse discharge in the processing of the workpiece surface when the temperature field is analyzed and calculated. Application of the principle of heat transfer obtained corrosion pit depth and current, pulse width and thermal role of the area of relationships;3、The application of energy discharge, and setting up a basic model of electrode wear. EDM process to conduct experiments on the above model validation and improvement;4、Using finite element analysis software ANSYS to the point heat source model simulation, obtained around the point heat source and the temperature field distribution and heat transfer in the process of dynamic effects chart; Through the contrast the experimental results with simulation results, for the first time put forward the EDM electrode wear and processing time for relationships.5、By EDM machining process of theoretical analysis, experimental results and finite element analysis ,resulted in loss of some of the laws of the electrode to explore methods for reducing the electrode wear, electrode amendment and replacement of electrode on-line compensation electrode wear compensation basic strategy.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  3. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  4. Design of Testing Equipment for Electronic Products,TN06
  5. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  6. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  7. Sham hose drum drive means and hydraulic system of the structure,TE973
  8. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  9. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  10. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  11. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  12. Simulation of the Clinching Process Using FEA Method with Steel and Aluminum Alloy Sheets for Automotive Sunroof Frame,U463.83
  13. M1 of CRH2-300 Train Finite Element Analysis and Travelling Comfort,U266
  14. The Design of Telescopic Asphalt Spraying System,U415.524
  15. Development of Post-process System in Sheet Metal Simulation Based on SolidWorks,TP391.72
  16. Failure Analysis and Structural Optimization of the Typical Fine Blanking Punch,TG385.2
  17. The Structure Design of 2000kN Servo Press for Hot Forming,TG385
  18. Al Wire Bonding Failure and Automatic Optical Inspection on Power Device Leadframe,TG441
  19. Simulation Analysis and Experimental Study on Hysteretic Behavior of High-performance Shear Panel Damper,TU352.1
  20. Three-dimensional Thermal Simulation and Structure Design of Phase Change Access Random Memory,TP333.8

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Special machine tools and processing > Electric machines and their processing
© 2012 www.DissertationTopic.Net  Mobile