Dissertation > Excellent graduate degree dissertation topics show

A Detection System of Train Wheel Based on CCD Imaging Technology

Author: WangJunKe
Tutor: CaoJiaZuo
School: Dalian Jiaotong University
Course: Applied Computer Technology
Keywords: CCD Dynamic Detection Digital Image Processing
CLC: TP274.4
Type: Master's thesis
Year: 2008
Downloads: 222
Quote: 1
Read: Download Dissertation

Abstract


In the railway system, Wheels of train is an important factor for exercise in security. Especially in recent years, speed of train has been improving constantly, this makes the size and geometric shape of wheels are higher requirements, the wheels of the train from time to time is necessary to detect Parameters do not meet the standards or wear-gauge train wheels have to be provided additional repair or scrapped, Otherwise it will affect the safe operation of trains. In the past, the dynamic detection of train wheels is mainly used by Cursor Caliper. This makes the detection process existed for many artificial factors, further impact on the accuracy of train wheels, for example, wantonness and low efficiency. Currently abroad also have some methods on train wheels detection methods and equipment , for example, fixed and portable detection device for parameters of train wheels automatic detection device in Japan Railway Hokkaido, U.S. electronic automatic measuring equipment, etc. But because of very expensive price and most of them is high precision mechanical contact. It s presence on the device itself and the issue of loss to the round of the parameters measured less, and many other factors but not in the country to introduce similar products, so how to improve labor productivity, improve the monitoring of the degree of automation and accuracy, it has become very concerned about issues in China’s railway departments.This paper is based on the measurement of CCD (Charge Couple Device) imaging technology and image processing technology related to computer control, a non-contact and online measuring system. At first, this paper makes an introduction of the hardware makeup of the testing system, then aiming at the geometric polynomial of image gathering caused by hardware device error, employs method of binary polynomial, all to rectify it geometric and applies "Statistical average method" to the partition of the image so as to acquire the various parameters of wheel tread. Eventually I setup a database and realize such functions as the storage, edition and inquiry of the data via conducting testing experiment on standard objects in the laboratory and analyzing the testing results obtained, thesis draws to a conclusion that the various parameters obtained by the software system, meet the requirements of the system, and the train wheel set automatic testing system is capable of realizing precise measurements of train wheel set.

Related Dissertations

  1. Study on Two Dimensional of Auto-Collimator Based on DSP,TH741.14
  2. Research on Temperature Measurement Technique Based on CCD Image Sensor,TH811
  3. Research on the Optimization of Laser Triangulation Device,TH744.5
  4. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  5. Data Collecting and Processing of Multi-Linear-CCD Visual Measuring System,TP274.2
  6. Research on Visual Servo System of Mechanical ARM,TP242.6
  7. Application Research of Digital Image Processing on Container Inspection,TP274.4
  8. The Combined Effect of Several Environmental Factor on Fertilization, Hatching and Juvenile Growth of Nile Tilapia,S917.4
  9. Research on Design of Intelligent Testing System of Grain Suspension Velocity,S220.2
  10. Flow Behavior Description of Two-Phase Flow Based on Image Processing Techniques,TP391.41
  11. Whell Device for Dynamic Testing,U270.7
  12. Military reconnaissance rockets imaging feature analysis and processing research,TP391.41
  13. The Study of Image Template Matching in the Piece Detection,TP391.41
  14. MTF Measurement of CCD Digital Camera,TP391.41
  15. Research on Edge Detection Method Based on Image Feature Vectors and Neural Network,TP391.41
  16. Research on Vectorization of Color Topographic Maps Based on MicroStation,TP391.41
  17. Research of Digital Image Processing Technology of ESPI,TP391.41
  18. A Study of Digital Image Processing Techniques in the Application of Detection Thread,TP391.41
  19. The Control System Design of Spectrophotometer of High Speed and High Accuracy,TP391.41
  20. Research on Method of Temperature Measurement Using Image Based on GRNN,TP391.41
  21. The Research of Wheel-Power-Meter Reading System Based on Digital Image Recognition,TP391.41

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Centralized testing and roving detection system
© 2012 www.DissertationTopic.Net  Mobile