Dissertation > Excellent graduate degree dissertation topics show

The Aqueous Two-phase Copolymerization of Acrylamide and Sodium Acrylate

Author: GuanZuo
Tutor: DingWei
School: Daqing Petroleum Institute
Course: Chemical Engineering
Keywords: aqueous two-phase polymerization acrylamide sodium acrylate intrinsic viscosity munber stability kenetics reactivity ratio phase diagram
CLC: O631.3
Type: Master's thesis
Year: 2006
Downloads: 535
Quote: 5
Read: Download Dissertation

Abstract


Aqueous two-phase polymerization is that the water-soluble monomers,initiator andanother water-soluble polymer are dissolved to form a homogeneous aqueoussolution,then polymerize to form a heterogeneous polymeric disperse aqueoussolution.The two polymers enriched in the disperse and continuous phaserespectively.It overcame the problems of mixing and heat transfer of polymerizationsystem.The aqueous two-phase polymerization was performed in water without anyorganic solvent.It also overcame the pollution and recycle problems of organic solventfor inverse phase suspension polymerization,water-in-oil inverse phase emulsionpolymerization and precipitation polymerization.It’s a new polymerization method forpreparing the water soluble copolymer .It was reported rarely that two water-solublepolymers were dissolved in another water-soluble polymer to copolymerize to formaqueous two-phase polymerization.In this paper,arylamide and acroleic acid sodiumwere selected to form aqueous two-phase polymers,then copolymerization was studied.Polyethylene glyol aqueous solution was selected as the dispersed medium of theaqueous two-phase polymerization for acryamide and acroleic acid sodium systembased on the hydrophobic interaction among water-soluble polymers.The viscositynumber of polymer aqueous solution and the stability of the polymerization system.theeffects of different molecular-weight PEG on emulsion state and stability werestudied,and finally the PEG20000 aqueous solution was the dispersion.The effect of initiator concentration,EDTA concentration,initial monomerconcentration,sodium formate and carbamide concentration,temperature ofpolymerization,pH of the system, monomers,emulsifier and intrinsic viscosity numberof HPAM on stability of HPAM-PEG aqueous emulsion system and monomeruntransformed ratio was studied.At last,by orthogonal,the optimum techonologicalparameters were fixed,and also the best HLB value.The effect of several technological parameters on polymerization velocity werestudied by dilatometer and the kinetics equation and activation energy.In this case,theeffect of the polarity of medium on reactivity ratio was a little by using partialhydrolysis degree to calculate anion degree to measure the reactivity ratio and usingF-R and other methods to measure it.In the last chapter,the phase diagrams of HPAM-PEG-water aqueous system wereobtained by turbidity titration,and the effects of temperature and the molecular weightof PEG were studied.With the increase of the molecular weight of PEG,the criticalphase splitting concentration decreased;with the increase of the temperature,the criticalphase splitting concentration decreased and then increased,it was lowest as whentemperature was 60℃.PEG and the phase enriched in HPAM were different inhydrophobic quality,so AM was dispersed into two phase,as the concenteation ofHPAM increased,the distribution number of AM increased;as the concentration of PEGincreased,the distribution number of AM decreased;as the temperature increased thedistribution number increased.According to the works and experiences,the stabilitymechanism of HPAM-PEG-water aqueous emulsion was discussed primarily.Thefactor were: the high viscosity in the droplet,the viscosity of continuous phase and thestatic electrification fragment.

Related Dissertations

  1. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  2. The Study on Structural Calculation and Analysis Method of Lattice-type Crane with Variable Cross-section Boom,TH21
  3. Power System Dynamic Voltage Stability Simulation Study Based on Precise Integration Method,TM712
  4. Simulation and Analysis about Switched Reluctance Generator Power Supply System,TM31
  5. Research and Design for the Laser’s Power Control System of Laser Direct Writing,TN249
  6. Stability Analysis of Systems with Time Delays,TP13
  7. Research on Input-To-State Stability of Discrete-Time Nonlinear Systems,TP13
  8. Astudy on Samuel Huntington’s Theory of Political Stability,D09
  9. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  10. Thermal Stability of Complexes of Chitosan Quaternary Ammonium Salt and Metal Ion,O634
  11. Synthesis and Application of the chloro- methoxy fatty acid methyl esters,TQ414.8
  12. Breeding of High-Yield Pigment Production Monascus and Studies on Pigments’ Qualities,TS202.3
  13. On Ohba’s Conjecture of One Class of Complete Multipartite Graphs,O157.5
  14. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  15. Research on Anti-periodic Solutions of Delayed Cellular Neural Networks without Assuming Global Lipschitz Conditions,TP183
  16. Characterization and Properties of capsaicin / CD system,TQ450.1
  17. Preparation and Properties of lead-free glass powder,TQ171.6
  18. Preparation and Evaluation on the Toxicological Safety and Stability of Deer Blood Wine,TS262.91
  19. Evaluation on Stability of Threshing and Redrying Lamina Structure of Tobacco,TS443
  20. Generator Excitation System of the Anti-saturation Control,TM301.2
  21. Differeces in Physical and Chemical Properties and Organic Carbon Stability of Black Soil between Cropping Systems in Northeast China,S153

CLC: > Mathematical sciences and chemical > Chemistry > Polymer chemistry ( polymer ) > Polymer physics and physical chemistry of polymers > The chemical nature of polymers
© 2012 www.DissertationTopic.Net  Mobile