Dissertation　

About 488 item dissertation in line with Cutter query results,the following is 1 to 50(Search took 0.090 seconds)

  1. Dynamics Research of High Speed Cutter Manipulator,FangTeng/Xiangtan University,0/74
  2. The Reverse Modeling Software about a Profile Cutter’s Development and Application,YangCongKe/University of Electronic Science and Technology,0/3
  3. Research on the Life of Cutter in Special Printer,LiYunTao/Harbin Institute of Technology,0/8
  4. Research of Cutting and Collecting Device System of the Aquatic Plants on the Surface of the Water,ShenWenLei/Shanghai Ocean University,,0/13
  5. The Experiment Research and Simulated Analysis for Cutter of4GH-120Walking Type Mountain Multi-functional Harvester,XiHaiLiang/Gansu Agricultural University,0/17
  6. Analysis and Recognition of the Wear State of Full-face Rock Tunnel Boring Machine Disc Cutter,WangLiHui/Tianjin University,0/56
  7. Mechanics Characteristic Analysis and Cluster Analysis for the Cutter of Shield Machine,LinShiXiang/Tianjin University,0/2
  8. Research on the Rock-breaking Characteristic and the Layout of TBM Gage Disc Cutter,WuYuan/Central South University,0/60
  9. TBM Cutter-head Drivet Scheme and Test Bench Related Design,HongXiao/Zhejiang University,0/20
  10. Reinforcing steel cutting machine, finite element analysis and dynamics research,XuShaoYun/Taiyuan University of Science and Technology,0/2
  11. Study on the Cutters' Layout Scheme of Combined Shield Cutterhead,ZhaoDuo/Tianjin University,0/5
  12. The Numerical Simulation of Earth Pressure Balance Shield Cutter Head Design Based on CFD,HuJing/Tianjin University,0/1
  13. The Study on Combined Cutting Rock Mechanism of TBM Disc Cutters,JiangCongJian/Tianjin University,0/7
  14. Numerical Simulation and Experimental Study of Rock Fragmentation Characteristic by TBM Disc Cutters,ZhuYi/Central South University,0/43
  15. Mechanical Characteristics of TBM Disc Cutter under the Crustal Stress and the Parameters Matching Researches of Rock-breaking,GuJianJian/Central South University,0/40
  16. Research on Opening Characteristic and Cutter's Layout Method of EPB Shield Cutterhead,LinZuoZuo/Central South University,0/56
  17. Research on the Cutter Selection and Design of Shield Cutting Large Diameter Pile Directly,LiuHao/Beijing Jiaotong University,0/28
  18. The Milling Device of Asphalt Pavement Milling Machine for Circular Pothole and its Milling Process Research,WuZeCong/Chang'an University,0/24
  19. Design and Finite Element Analysis of Spiral Cutter and Frame of Small Snow Sweeper,SuGuoDong/University of North,0/9
  20. Research on Aero-engine Fan Blade Exploding Out Technology,ZhangGuoJing/Zhejiang University,0/27
  21. The Development of Design System for High Pressure Low Noise Helical Rotor Pump and Complicated Tool,JiangZuWu/Harbin Institute of Technology,0/11
  22. Structure Design and Flow Pattern Analysis of Large Cutter Suction Pump,YangZuoQing/Zhejiang Ocean University,,0/4
  23. Research on Design of Double Helical Rotors Profile Configuration and Tool Shape-edge,JiaChunYang/Central South University,0/18
  24. Numerical Simulation of Disc Cutter's Wear Evolution for TBM,ZhuZhenZuo/Central South University,0/58
  25. Research on Gear Error Parameter Extraction and Model Reconstruction Algorithm,ChenHongYin/Changchun University of Science and Technology,0/1
  26. Profile Design and Interpolation Simulation of Form-Cutters for Milling Helical Gears,WangXinHua/Northeastern University,0/6
  27. Research on a New-type of High Speed End Milling Cutter Based on the Machining Stability,TangAiMin/Hunan University,0/166
  28. Studying for Structure Parameters Optimization and Dynamic Characteristics of Diamond Micro Cutting Tools,WangDeTing/Harbin Institute of Technology,0/20
  29. Research on Indexable Form Carbide-tipped Finishing Gear Milling Cutter,ZhouNing/Harbin Institute of Technology,0/19
  30. Feature-based Evaluation for Cutting Tools in Machining Ti-alloy Tructural Components,WeiXiuGuo/Nanjing University of Aeronautics and Astronautics,0/13
  31. Ball-end Milling Cutter Parametric Design and Software Development,ZhangHui/Harbin University of Science and Technology,0/29
  32. Research on Testing Temperature Cutter with NiCr/NiSi Thin-Film Thermocouple and Heat Transfer Mathematic Model,YinJunWei/Dalian Jiaotong University,0/11
  33. Heat Pipe Cutter Design Preparation and Its Heat Dissipation Performance Analysis,LiuZhiJun/South China University of Technology,0/39
  34. Research on Modal Parameters and Its Influence on Cutting Performance of High Speed Face-Milling Cutter,LiuLuNing/Shandong University,0/152
  35. Research on Wear Detection of NOMEX Honeycomb Core Ultrasonic Finishing Round Cutter,ChenJianQiao/Hangzhou University of Electronic Science and Technology,0/1
  36. Research on Compensation Algorithms of Ball-end Milling Cutter for5-axis Freeform Surface Machining,JiangYan/Harbin Institute of Technology,0/58
  37. Error Compensation Technology for CNC Machine Tool and its Application,ZhuShao/Hunan University,0/81
  38. Service Methods and Platform for Ecosystem of Soft Material Cutter,LiTao/Zhejiang University,0/10
  39. Study on NC Cutting Tool Matching and Management System Based on STEP-NC,WangDi/Harbin University of Science and Technology,0/12
  40. Research on Interpolation Pre-processing Modules in CNC System of Grinder for Complex Tool Type Surface,ChenQingXia/Central South University,0/12
  41. Development on Operational Software System of CNC Tool Grinder,ZhangTianWei/Harbin Institute of Technology,0/22
  42. Research on Forming Grinding Technology of Special Spiral Surface Tool,ZhaoWenChang/Xiamen University,0/2
  43. Research on Cutting Trajectory Control Method of Cutter for High Speed Milling Hardened Steel,LiHongYan/Harbin University of Science and Technology,0/3
  44. Analysis of Physical Fields and Safety Margin Control Method of High Speed Cutter,XiaDanHua/Harbin University of Science and Technology,0/2
  45. Parametric Design of Plunge Milling Cutter and Optimization of Cutting Parameters,MaDianLin/Harbin University of Science and Technology,0/5
  46. Modeling and Experimental Study on Burr Formation Process in Micro-milling,NiHaiBo/Harbin Institute of Technology,0/35
  47. Generation and Optimization of Tool Trajectories for Five-axis Flank Milling,DaiYunZuo/Huazhong University of Science and Technology,0/25
  48. Centrifugal Stress Analysis and Structure Optimization on End Milling Cutter Body of Large Diameter,ChenDongDong/Yanshan University,0/42
  49. Experimental and Simulation Rearch of P20Mold Steel for High Speed Milling Force,WangChao/Yanshan University,0/91
  50. Tool Path Planning for Die&Mold of Auto Panel with High Efficiency Milling,JiangZhiPeng/Harbin University of Science and Technology,0/7

Total 10 Pages First Previous 1 2 3 4 5 6 7 8 9 10 Next Last

© 2012 www.DissertationTopic.Net  Mobile