Dissertation　

About 2039 item dissertation in line with Sintering query results,the following is 51 to 100(Search took 0.057 seconds)

  1. Application Investigation of6σ Management in Sinter Production of TISCO Iron Making Plant,HaoYongShou/Tianjin University,0/4
  2. Intelligent Integrated Optimization and Control Strategy and Its Application for Mixture Preparation in Sintering Blending Process,LiYong/Central South University,0/47
  3. Fundamental Research on Iron Ore Sintering with Biomass Energy,GanMin/Central South University,0/139
  4. Sintering Blending Optimize the Design and Application Based on Swarm Intelligence Optimization Algorithm,WangMing/Tianjin University of Technology,0/0
  5. CO/CO2Computational Modeling Studies of the Sintering Process for Carbon Efficiency Optimization,XiangDe/Central South University,0/12
  6. Dynamic Steam Parameters Setting Method of Sintering Waste Heat Recovery Process Base on Exergy Efficiency Optimization,CaiYiQing/Central South University,0/25
  7. Modeling Method for Calculation of Exergy Consumption and Coke Ratio in Sintering Process,WangFang/Central South University,0/27
  8. Application of Operation Optimization Method for Sintering Material Field,ZhouJinNi/Central South University,0/12
  9. Principle and Technique of On-line Detection on Sintering Mix Permeability,TanQiBing/Central South University,0/10
  10. Study on Iron Ores Proportion Optimization Mathematical Model for Sintering,HuangXiaoXian/Central South University,0/49
  11. Study on Controlling of Sintering Ignition Temperature and Temperature Profiles of Sinter Bed,LiWanHong/Chongqing University,0/69
  12. The Research on Dust Using Effect on Sintering Process and Saving Energy and Reducing Consumption,JiangJian/Wuhan University of Science and Technology,0/44
  13. Research on the Behavior of Sulfur and Iron in Series-Combination Sintering Process,FuYunFeng/Central South University,0/13
  14. Research on Chemicalreaction Dynamic Property and Thermal Property of Sinter Mixture,WangYing/Beijing University of Technology,0/39
  15. Study on Energy Saving and Environmental Protection in Iron Ore Sintering Process,WangSuPing/Wuhan University of Science and Technology,0/103
  16. Study on the Fabrication Process of Ceramic Corundum Abrasive,LuoMiaoDi/Tianjin University,0/1
  17. Research on Preheating and Post-curing for Selective Laser Sintering with Dual Light Sources,HeCheng/Xi'an University of Science and Technology,0/40
  18. Research on Forging and Microstructure and Mechanical Properties of TiAl Alloy Containing β/B2Phases,SuYongJun/Harbin Institute of Technology,0/200
  19. Preparation of Silica Oxide Ceramic Core for Hollow-blade Casting,LiMin/Harbin Institute of Technology,0/24
  20. Study on the Microstructure and Property of High Nb Containing TiAl Alloys Prepared by Reactive Sintering,FengJie/Harbin Institute of Technology,0/36
  21. Effect of Heat Treatment Process and Ta Content on Microstructure and Properties of9Cr-ODS/RAFM Steel,JiangYouFang/Huazhong University of Science and Technology,0/14
  22. Research on the Microstructrue and Properties of PM TiNiAl Alloys,LiuBoLu/Nanjing University of Aeronautics and Astronautics,0/7
  23. Study on Microstructure and mechanical properties of Ti-24Nb-4Zr-8Sn alloy by spark plasma sintering,GuYi/Kunming University of Science and Technology,0/34
  24. Research and its microstructure and mechanical properties of Ti-35Nb-7Zr-5Ta alloy by spark plasma sintering.,DuWeiWei/Kunming University of Science and Technology,0/31
  25. Microstructure and Mechanical Properties of Rapid Solidified Al-Si-Cu-Mg Sintering Aluminum Alloy,ZhangZhiXiong/Harbin Institute of Technology,0/88
  26. Compressive Behavior of Porous Titanium with Helical Pores,TangYingQiao/Harbin Institute of Technology,0/52
  27. Influence of Methods of Sintering and the Heat Treatment on the Microstructure and Properties of Steel Bonded Titanium Carbide,XuanCuiHua/Hunan University,0/26
  28. Influence of C Addition on the Glass Forming of Amorphous Al-based Alloys,WangJingFu/Jinan University,0/14
  29. Research on SPS Sintering Preparation Technology of Ti-based Amorphous Alloys,XuZhiYing/Yanshan University,0/43
  30. MA Preparation of Fe-based Amorphous Alloy Power and the Research of SPS Sintering Process,WangHaiJian/Yanshan University,0/83
  31. The Co-MIM Preparation of Gradient Cemented Carbide and Research of Sintering Densification,PanWenQiang/Central South University,0/6
  32. Preparation of Fe-based Amorphous Nanocrystalline Alloy Soft Magnetic Materials by MA and SPS Technologies,FengGuangHui/Yanshan University,0/2
  33. Research on Process and Mechanism of Vanadium Tailing for Roasting Ceramsite,ChenJia/Wuhan University of Science and Technology,0/55
  34. Study on the pretreatment of chromite microwave heating process,ChenJian/Kunming University of Science and Technology,0/86
  35. Studies on the Technology of Al-Fe Separation of High-Fe Bauxite,ZhangSong/Northeastern University,0/19
  36. Synthesis and Optical Properties of Low Density Porous Gold Nanoparticles,LiZuo/Huazhong University of Science and Technology,0/2
  37. Fe based honeycomb carrier material preparation and microstructure and properties of,DuYuJie/Kunming University of Science and Technology,0/33
  38. Ti (C,N)-based Cermets Composite Powder Prepared by Sol-gel Method,WuXiaoBo/Hunan University,0/31
  39. Modeling and Simulation of the Low-Dimensional Metallic Single Crystal Nano-Structural Response under Extreme Loading,JiangShan/Dalian University of Technology,0/182
  40. Sintering Process Study on Paper-based Flexible Circuits Based on Nanosilver Conductive Ink,YangGaoYang/Tianjin University,0/2
  41. Preparation and Characterization of Copper Nickel Nano-powders and Bulk,WuXiaoQiang/West China University,0/37
  42. Study on Preparation Process of Copper Nanoparticles Used for Inkjet Printing,LiuJingDong/Harbin Institute of Technology,0/39
  43. Preparation and Performance of Nanocrystalline Bi2Te3Bulks,LiuJinHua/Harbin Institute of Technology,0/64
  44. Investigation of the Processing, Microstructure and Mechanical Properties of Bulk5083Nanostructured Grained Aluminum by Rapid Solidfication and Powder Metalurgy,WuBo/Yanshan University,0/4
  45. Effect of Graphite Replacement with Ti3SiC2on the Properties of Copper Matrix Friction Materials,ZhangXingWang/Yanshan University,0/3
  46. Technical Study on the CNTs Reinforced Magnesium Matrix Composite by Powder Metallurgy,WangYu/Northeastern University,0/5
  47. Study on Pressureless Sintered SiC-based Ceramic Composites and Pipes,TangChunLiu/Harbin Institute of Technology,0/64
  48. Fabrication and Machanical Properties of ZrB2-ZrC Composites,HuZhiYi/Harbin Institute of Technology,0/27
  49. Microstructure and Properties of Fe-Al Composite Material Blended with Tungsten Concentrate Powder Prepared by Laser Ignition Induced SHS,YuJunNa/Liaoning Technical University,0/5
  50. Study on the Application of Spodumene Crystallizable Glass for LTCC Composites,HeLvTing/Tianjin University,0/1

Total 41 Pages First Previous 1 2 3 4 5 6 7 8 9 10 Next Last

© 2012 www.DissertationTopic.Net  Mobile