Dissertation　

About 82 item dissertation in line with Taguchi method query results,the following is 51 to 100(Search took 0.048 seconds)

  1. Application Research of the Design Quality Management Method Based on QFD & Taguchi Method,WangWei/Shenyang University of Technology,4/638
  2. Robust design methods in aircraft design studies,DingJiFeng/Northwestern Polytechnical University,8/317
  3. Robust design method and its application in the structural design of the rocket engine,SunPeng/Northwestern Polytechnical University,8/321
  4. Robust Control of Multiple Joint Robot Driven by Ultrasonic Motors,ShuaiShuangHui/Nanjing University of Aeronautics and Astronautics,0/130
  5. Robust Optimal Design for Vehicle Handling Performance,TangChaoYong/Huazhong University of Science and Technology,5/392
  6. Study of Light Guide Plate Molding,ShiXueFeng/Suzhou University,6/297
  7. Machining Technology of Machinable Ceramics,Chen/Tianjin University,2/170
  8. The Research and System Designing of Cutting Parameters Optimization of the Woodwork Numerical Control Processing,DingWenHua/Beijing Forestry University,1/130
  9. The Development of Eddy Current Testing System Based on GMR and Research on Reliability of Deep-Seated Flaws Detection,GaoYangHua/Zhejiang University,2/236
  10. Design of Brushless DC Motor for Air Conditioning of All-Electric Vehicle,YuBing/Shenyang University of Technology,0/340
  11. Study on Process Precision of Fused Deposition Modeling,ZhangZuo/Dalian University of Technology,4/465
  12. Improvement measures and numerical simulation of the weld line of injection molded parts,ZengLingQin/Taiyuan University of Science and Technology,7/155
  13. The Reducing of Quality Characteristic Value Fluctuation of Pusher Kiln Furniture (Slab) by Taguchi Method,ZhangZongGang/Shanghai Jiaotong University,0/56
  14. Co-injection molding intelligent optimization and control,Sun/Nanchang University,0/60
  15. GUM based Taguchi method and DC digital voltmeter calibration and measurement uncertainty of,BianGuangQing/Nanjing University of Technology and Engineering,0/154
  16. Taguchi method in monocrystalline silicon solar cell production process optimization studies,HeMeiHua/Nanjing University of Technology and Engineering,3/450
  17. Taguchi Method Based on atomic absorption spectrophotometry measurement error of,QianYuGen/Nanjing University of Technology and Engineering,1/95
  18. Study on the Reliability Analysis of Particular Equipment,ZuoShuGuang/Chang'an University,4/150
  19. Taguchi method of software development cost estimates,LiJianLiang/Fudan University,1/78
  20. The mechanical properties of the plastic ball grid array package (PBGA) under different load conditions and optimization analysis,TanGuangBin/Jiangsu University,1/155
  21. Analysis of Assisted Gas Flow in Laser Cutting and Optimization on Parameters of Nozzle,LvJianJun/Jiangsu University,0/152
  22. Design and Optimization on Dual-Rotor Permanent-Magnet Wind Generator,ZhuWenJuan/South China University of Technology,0/83
  23. The Simulation Research on the Performance Reliablity of the Fuze Ball Rotor Mechanism,ZengZhaoHui/University of North,1/59
  24. Cluster Warhead Distribution Law and Damage Effects Strafe the Airport Runway,JuYong/Harbin Institute of Technology,0/177
  25. Optimization and Design of Suspension Parameters Based on Handling Stability of a Mini Passenger Car,DongJunHong/Hunan University,2/217
  26. Parameter Optimization of Ultra-Fine-Pitch Wire Bonding Process,MoZhuoYa/Harbin Institute of Technology,1/46
  27. Plastic Structure and Gas-Assisted Injection Molding Process Optimization of Car Door Handle Based on Numerical Simulation,GuoXingXing/Qingdao Technological University,0/18
  28. Study on Surface Sanding Technology of Special-shaped Wooden Door,ZhangJie/Chinese Academy of Forestry,0/38
  29. Research on Evaluation and Optimization Designing Method of Product Sensory Quality,ZhuMingJian/Northeastern University,1/126
  30. Improving the Light Leakage Phenomenon of LCD Panel by Using Taguchi Method,HuangWei/Shanghai Jiaotong University,0/35
  31. Application of Component Quality Design in O Co.Ltd,LiuShengZhi/South China University of Technology,0/20
  32. Study and Optimization of Process Dimension and Tolerance Based on Matrix,QianZePeng/Shandong University of Science and Technology,0/68

Total 2 Pages First Previous 1 2 Next Last

© 2012 www.DissertationTopic.Net  Mobile