Dissertation > Excellent graduate degree dissertation topics show

Study of Titanium-modified Phenolic Resins

Author: ShenShiHong
Tutor: LiuYuJian；ZhangYan
School: East China University of Science and Technology
Course: Materials Science and Engineering
Keywords: phenolic resin char yield ablation resistance Titanium-modified
CLC: TQ323.1
Type: Master's thesis
Year: 2012
Downloads: 97
Quote: 0
Read: Download Dissertation

Abstract


Phenolic formaldehyde resins(PF) are widely used in the thermal protection of the spacecraft for their excellent heat resistance and good process performance. With the development of the spacecraft industry, extensive research has been enhanced to improve the heat resistance, thermal stability of PF. It is reported that the addition of inorganic compounds are used to modify the phenolic resins to improve PF’s high temperature resistance performance and flame retardancy. The addition of heavy metals is less researched, while the heavy metal modification of PF can improve PF’s high temperature resistance performance effectively. In this paper, titanium element is introduced into the structure of PF by chemical modification.A new type of titanium-modified phenol-formaldehyde resin (Ti-PF) was prepared by the compounds such as phenol, paraformaldehyde and tetraisopropyl titanate. The char yield of the PF has been increased 11% by the addition of titanium compounds.The titanium content, phenol-formaldehyde ratio, esterification time, condensation temperature and condensation time are the main five factors that affected the char yield of titanium modified phenolic resin. The best synthesis condition is obtained by the orthogonal experiment method with the five factors and four levels. The single-factor experiment was used to obtain the optimum conditions to synthesis titanium modified phenolic resin. Experimental results show that titanium content is the biggest factor affecting the char yieled, followed by the esterification time and then the condensation time. The best level of titanium content is 1%, the best ratio of phenol formaldehyde is 1.8:1, the best esterification time is 20 minutes, the best reaction temperature is 80℃, the best reaction time is one hour.FT-IR was adopted to characterize the molecular structure of the modified resin and unmodified resin. The thermal degradation behavior of the cured Ti-PF was studied by thermal gravimetric (TG) method. In addition, the curing behavior and curing kinetic characteristics were studied by differential scanning calorimetry (DSC). X-ray diffraction was used to analyze the structure of the white powder which was the residual of the titanium phenolic resin under high temperature in the air.

Related Dissertations

  1. Preparation of Based on the Phenolic Resin of Activated Carbon and Adsorption-Photopcatalytical Character of Supported TiO2,TQ424.19
  2. Study on Properties of Thermal Shock and Ablation Resistance for Gr/Al-Mg Composites,TB332
  3. The Preparation and Electrochemical Tests of Carbon Foam,O613.71
  4. Ortho - phenyl ether type phenolic resin synthesis and ammonia-free molding compound,TQ323.1
  5. POSS silicon insulating material formulations and application of exploration and research,V259
  6. The Research on Modification of Glue Used in Bamboo Curtain Plywood and Innovation of Glue Application Means,TS653
  7. The Study of Compounded Fire Resistants Added in Phenolic Resin,TQ323.1
  8. Synthesis and Properties of Novel Diphenyl-containing Epoxy Resin,TQ323.5
  9. Compressibility of automotive brake friction materials and friction properties of,U465
  10. Study on Ester Cured Phenolic Resin System for Modeling,TG221
  11. Preparation of Novel Activated Carbons and Their Electrochemical Performance,TQ424.1
  12. Preparation of Phenol-Form Aldehyde Resin Adhesive with a Partial Replacement of Phenol with Wood Tar,TQ433.431
  13. Study on Preparation and Properties of Isotropic Copper Filled Conductive Adhesive,TB383.1
  14. Studies on the Integrated Utilization of Resorcinol Still Residues,TQ243.12
  15. Study on the Preparation Sulfur-Free Expanded Graphite/Phenol Formaldehyde Resin Composite Bipolar Plates,TM911.4
  16. Study on Quality Control, High Temperature Crosslinking and Foaming Mechanism of Sulfomethylated Phenolic Resin,TE254.1
  17. Preparation and Properties of SIC High Temperature Ceramics Coating,TG174.453
  18. Synthesis and Electrochemical Performance of LiFePO4/C for Lithium-Ion Battery Cathode Material,TM912
  19. Catalytic graphitization of carbon materials,TQ342.742
  20. Fructose phenolic resins and melamine formaldehyde resin synthesis,TQ433.43

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > Polycondensation resin and plastic > Phenolic resins and plastic materials
© 2012 www.DissertationTopic.Net  Mobile