Dissertation > Excellent graduate degree dissertation topics show

Research on Control System and Head of 7-Axis NC Fiber Placement Machine

Author: LiuLiXin
Tutor: LuHua
School: Harbin Institute of Technology
Course: Mechanical Manufacturing and Automation
Keywords: composite fiber placement head of fiber placement CNC control system UMAC
CLC: TG659
Type: Master's thesis
Year: 2008
Downloads: 101
Quote: 0
Read: Download Dissertation


As a kind of composites, fiber reinforce plastic has lots of good characters, such as light weight, anticorrosion, anti-fatigue damage, few machining, absorbing microwaves of the radar etc. It is widely used in aeronautics and astronautics industry.NC fiber placement basing on the fiber winding, is a kind of manufacturing advanced automatic manufacturing technique. Fiber placement equipment controlled by the computer system, can complete the assignments of fiber placement on the mandrel’s surface following set locus. It can complete variable angle continuously placement, form concave curve surface, change the width of fiber belt. It also applies to manufacture the fiber reinforced product whose configuration is complex, such as the asymmetric revolving body with negative curvature, shell component with quirk or strengthening rib.According to the path of fiber placement, 7-aixs NC fiber placement machine should contain 3 translational degrees, 4 rotational degrees and the head. By improving the 6-axis winding equipment of CNC laboratory, reserved mainshaft C coordinate and three rectilinear X,Y,Z coordinates, added an wrist which has 3 rotational degrees. The head of fiber placement is controlled by the wrist and the machine tool. The head is the key device of the placement machine with complex structure. It places the fiber on the mandrel’s surface. In the head, the main function modules are clamping, restarting, cutting, compacting. The four modules ordered in line, independent, the passages of the fiber can increased by adding the modules. The cylinders and servomotor complete the task in each module.The control mode of the placement machine is IPC+UMAC+PLC, this is an Open CNC System for 7-aixs fiber placement machine. IPC takes charge of the NC program format, condition monitoring etc. UMAC takes charge of the machine motion control, PLC controls logic control. This CNC software using on the Windows XP system, was developed by VC6.0. It was designed as modular. There are three modular in the software, Information Hinting, Manual Operation, Automatic Operation, which developed by dynamic link library PComm32 in UMAC. Human-Machine Interface is simple operation, convenient maintenance.

Related Dissertations

  1. The Preparation and Thermoelectric Properties of Rare Earth Subsituted Ag Composite Ca3Co4O9-Based Oxides,TQ174.1
  2. Synthesis, Structure and Properties of PBO/SWNT Composite Fibres,TQ340.64
  3. Study on Properties of Thermal Shock and Ablation Resistance for Gr/Al-Mg Composites,TB332
  4. Study on Theory and Experiment of Wire Drawing with Composite Ultrasonic Vibration,TG663
  5. Technology of Filling Clearance and Optimizing the Bonds during Ultrasonic Brazing,TG454
  6. Study of Tin Alloy Carbon Composite Used for Lithium Ion Battery,TM912.9
  7. Study on Preparation of Composite Cross-linked Modified Modified Potato Starch,TS236.9
  8. Municipal tourism land use planning environmental impact assessment,X820.3
  9. The Combined Effect of Several Environmental Factor on Fertilization, Hatching and Juvenile Growth of Nile Tilapia,S917.4
  10. Research on the Theory of the Transmission-line Metamaterials and Their Applications,O441.6
  11. Of Bi N Co-doped TiO \u003csub\u003e 2 \u003c/ sub\u003e of the preparation and performance,O614.411
  12. Preparation and Characteration of Composite Microspheres with Dual-, Triple- Responsive Properties,O631.3
  13. Study on Technics & Performance of Nano Electroless Composite Plating on 20~# Steel,TQ153
  14. Research on Spinning Performance of Collagen and PVA Composite Solution,TQ340.64
  15. Preparation, Characterization and Application of Prussian Blue Composite Nanomaterials,TB383.1
  16. The Preparation and the Properties of the Composite Films from Cassava Starch and Guar Gum,TS236.9
  17. Fermentation and Immunoreactivity of Extracellular Polysaccharide by P.baumii Pilát,R285
  18. Development of Functional Automotive Interior Textiles,TS106.6
  19. Technological Research on Preparation of High Activity Walnut Pulp by Ultrasonic-compound Enzyme Synergistic Method,TS255.6
  20. Adjustable composite element frequency selective surface design,TN713

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Program control machine tools, CNC machine tools and machining
© 2012 www.DissertationTopic.Net  Mobile