Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace

Author: DongHaiMei
Tutor: SunShaoZeng
School: Harbin Institute of Technology
Course: Thermal Power Engineering
Keywords: numerical simulation stereo-staged combustion Over Fire Air NO_x tangentially fired boiler
CLC: TK224.11
Type: Master's thesis
Year: 2008
Downloads: 138
Quote: 0
Read: Download Dissertation


A stereo-staged low NOx combustion system is consist of Horizontal Bias Combustion (HBC) burners and Over Fire Air (OFA). Numerical simulation of the combustion process and NOx emission in a 670t/h tangentially fired furnace with stereo-staged combustion system was performed on CFD (Computational Fluid Dynamics) software platform. In the numerical simulation of furnace process, the Realizable k ?εtwo equations turbulent model was used to simulate the turbulence. The stochastic tracking model was applied to analyze the gas-solid flow field. The P-1 model was applied to simulate radiation. The devolatilization process was simulated by two competing reaction model. The combustion of volatiles was modeled by the Probability Density Function (PDF). Char combustion was simulated by diffusion-kinetics model.The temperature field and the distribution of combustion species’concentration in the furnace were gained. The comparison between the simulation and the in situ test shows a good agreement. The result also shows that the stereo-staged combustion system can keep good flame stability and low NOx emission.Several cases with different secondary air arrangements, excess air ratio and arrangement mode of OFA were studied. The Comparison of normal and postponed secondary air arrangements on combustion process and NOx emission shows that the normal secondary air arrangements reduces more NOx. The excess air ratio has an important effect on the emission of NOx. With the decrease of the excess air ratio , the concentration of O2 at the furnace exit reduces,and the emission of NOx also reduces. The effect of OFA was also studied by the comparison of two cases one with no air through the nozzles of OFA and the other with OFA working normally. Results show that the application of OFA reduces the emission of NOx greatly. The position of OFA in the furnace also has influence on the emission of NOx. While the residence time of coal in the primary combustion zone varys form 0.35s to 0.65s, the emission of NOx lessens when the elevation of OFA increases. When the residence time is more the 0.65s, there is a limit elevation above which the increase of the height of OFA has little impact on the diminishment of the emission of NOx.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Experimental Research on Influence of Coal Reburning Reaction Conditions on NO_x Reduction by Non-Catalytic Reduction of Ammonia,X701
  6. The Effect of Composite Additive on the SNCR,X701
  7. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  8. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  9. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  10. Study of Method and Facilities for Transfering from Hot Air to Exhaust Air Converying System,TK223.25
  11. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  12. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  13. Numerical Simulation of Biomass Direct Reburning,TK16
  14. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  15. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  16. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  17. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  18. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  19. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  20. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3

CLC: > Industrial Technology > Energy and Power Engineering > Steam Power Engineering > Steam boiler > Furnace process and pot process > Furnace process > Combustion process
© 2012 www.DissertationTopic.Net  Mobile