Dissertation > Excellent graduate degree dissertation topics show

Characteristic Study of Combustion in Central Reverse Flame Chamber

Author: HuangQingWei
Tutor: WangHuaiBin
School: Harbin Institute of Technology
Course: Engineering Thermophysics
Keywords: central reverse flame combustion chamber numerical simulation optimize experiment
CLC: TK223.21
Type: Master's thesis
Year: 2008
Downloads: 72
Quote: 0
Read: Download Dissertation


Central reverse flame chamber possesses characteristics of more uniform of temperature distribution, lower production of Nitrogen Oxides, higher combustion efficiency, more reasonable load of stay bolt tube and stay bolt plates, more simple of manufacturing process, more compact of structure than other oil-boiler chamber. Central reverse flame chamber will be a new direction for middle and small oil-boiler. People design it by imitating foreign products, so there is no ideal calculation method and theoretical basis in China. These questions obviously restrain applications of central reverse flame chamber.This paper researched and analysed combustion, flow, heat transfer based on mass conservation equation, momentum conservation equation, energy conservation equation, composition equation by computer simulation. Numerical computation of combustion processes combined with combustion theory, experiments and burner design based on computer. It is a good method to guid experiments and design work. Numerical simulation provides strong support for designing central reverse flame chamber.Geometric model was founded from the combustion device in the laboratory. Then the combustion processes of the combustor was simulated by FLUENT6.2 software. At the same time, this paper analyzed the influences of different nozzles and slenderness ratio on combustion.The temperature field, velocity field, the field of NOx concentration, average temperature of outlet flue gas and combustion efficiency were computed in different nozzles and slenderness ratio. Then the combustion chamber was optimized by analysing the fields. To validate the results, the same fields of combustion chamber were simulated in the same conditions. By the frontal results contrast with the back results, the conclusions were obtained: temperature was well-distributed, flue-gas temperature of exit was lower, combustion efficiency was improved, NOx emission was decreased in optimized combustion chamber, as the fact that optimal combustion chamber was reasonable and optimized in volume and mass. Distribution of temperature in axial direction and radial direction, combustion efficency, NOx emission of outlet were measured in a central reverse flame furnace based on optimization results. Numerical simulation results tally well with the testing results.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. The Design and Experimental Rearch of Disposable Catalyzer in the Process of Coal Liquefaction,TQ529.1
  3. Study on Springback of High-Strength Steel Stamping,TG386
  4. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  5. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  6. Study on Browning Factors and Process Optimization of Casein Purified from Qula,TS252.5
  7. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  8. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  9. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  10. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  11. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  12. Numerical Simulation of Biomass Direct Reburning,TK16
  13. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  14. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  15. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  16. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  17. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  18. The Design and Accomplishment of Simulition Platform for Voltage Clamp Experiment Based on Cell Electrophysiological Model,R318.0
  19. Multiple ANN/HMM Hybrid Used in Speech Recognition,TN912.34
  20. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832

CLC: > Industrial Technology > Energy and Power Engineering > Steam Power Engineering > Steam boiler > Boiler constructed > Combustion devices > Combustion chamber
© 2012 www.DissertationTopic.Net  Mobile