Dissertation > Excellent graduate degree dissertation topics show

Design of the Main Controller in Automotive Body Network Control System

Author: JiangYuanZhi
Tutor: CuiGang
School: Harbin Institute of Technology
Course: Computer Science and Technology
Keywords: LIN bus Rain brush control Instrument display CAN bus
CLC: TP273
Type: Master's thesis
Year: 2008
Downloads: 111
Quote: 0
Read: Download Dissertation


With the development of automotive electronics,body control system has aroused more and more attention.Body Control system is mainly to enhance the convenience of the drivers and the comfort of the passengers. Body control system covers lots of things, including lighting control systems, door control systems, instrument display system. Because the control objects locate at the different place. the traditional peer-to-peer control method will need the large number of cable connections between the control modules and the control objects.This will inevitably cause the vehicle wiring complexity, manufacture and installation difficulties. The control modules can be designed by the location in distributed system. The modules can communicate with each other through the bus,so it will improve the performance of the system. At the same time the distributed system increases the flexibility of the system, and can easily change nodes. In addition the distributed system also reduces the static current , and increase of the stability of modules. With bus technology to integrate the independent electronic devices of the vehicle, it will implement data fusion of the distributed system.According to the actual work environment, the article design the distributed CAN / LIN network control system. In this paper, it implements the design of the master control modules with rain brush control, instrument display, the lights switch control, water motor, alarm horn control, and other functions. The master control modules is the central of the control system , and it can control the slave modules by the LIN bus.In the hardware design, the master module use the Freescale’s MC9S08DZ60 chip with a reasonable circuit layout. The article gives the functional module circuit and the achievement of the principles. Using the modular design mind ,the article design the vehicle control system software platform. Propose a new mehtod to collect the speed value with relatively high accuracy. Having the CAN bus interface, it makes the main control module can be mounted to the CAN-bus network, collecting the key signals which the instrument display system will need. The vehicle control systems ,introduced by the article, has entered the test phase,and it meets the demand.

Related Dissertations

  1. Development of GJB1188A Bus Signal Monitoring and Recording Device,V248.2
  2. The Design and Optimization of Locomotive Signal Testing System Based on ARM9,U284.91
  3. Study on the Locomotive Dynamic Supervision System,U284.48
  4. The Inductive Load Based Vehicle Body Network Control System,U463.6
  5. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  6. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  7. Research on High-Performance Computer I/O Bus,TP336
  8. Development of High Speed Data Acquisation and Playback Module Based on PCI Express Bus,TP274.2
  9. Development of the Digitizer Based on PCI-E Bus,TP274.2
  10. Design of LXI 1553B Bus Communication Module,TP273
  11. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  12. Development of Tractor’s Virtual Instrument System Based on CAN Bus,S219.02
  13. Research and Design of Web Reports Based on Service-Oriented Architecture,TP393.09
  14. Reform of the civil service positions Consumption,D630
  15. CAN bus technology in the meteorological monitoring System Research and Implementation,P409
  16. Application of AWG in Decoy Protection Equipment,TN97
  17. The Study on Site Selection Methods about Bus Transfer Hub at Cross-Harbor Tunnel in Qingdao,U491.17
  18. The Study Intelligent Pressure Transmitter Based on Hart Protocol,TP212.6
  19. Research on Bus Collision and Rolling Simulation Technology,U467.14
  20. The Design and Implementation of Medical Treatment Calling System Based on CAN Bus,TN99

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile